Home › Vehicles › Toyota › Camry › 2007-2011 Toyota Camry Wheel Bearing Part Numbers
The short version
- The 2007 Camry wheel bearing front number is 510063, documented through 2009. The rear is handed, left 512206 and right 512207, covering the entire 2006-2011 span.
- For 2010-2011 the front carries the same generation’s hardware. The catalogs stop at 2009, so match the old part or the VIN.
- Left and right rear hubs are different parts on this generation, not a shared design.
- The handed rear pair actually began a year earlier, in 2006, and simply continued here.
The 2007-2011 Toyota Camry replaced the previous generation with a heavier body and a wider track. The wheel bearing lineup simplified along with it. Where the prior cars split the rear by engine and then hit an undocumented gap, this generation settles on one handed pair for the whole run.
Where the 2007 Camry wheel bearing numbers sit
The front press-in ball is 510063, documented for 2007 through 2009.
The 2007 Camry wheel bearing rear number depends on the side: 512206 on the left, 512207 on the right.
Toyota Camry wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2010-2011 | Front, press-in ball | match old part or VIN |
| 2007-2009 | Front, press-in ball | 510063 check price |
| 2006-2011 | Rear hub, left | 512206 check price |
| 2006-2011 | Rear hub, right | 512207 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2007-2011 Toyota Camry: 2007, 2008, 2009, 2010, 2011. Other years live on the main Camry wheel bearing page.
The rear hub on this generation is handed. The two sides carry different numbers across the full 2006-2011 span.
512206 fits the left corner and 512207 fits the right. Installing the wrong side is the most common ordering mistake here.
The front 510063 number is documented only through 2009. For 2010-2011, match the old part or the VIN.
Year by year
2007, 2008, and 2009 are fully documented. Front is 510063, rear is 512206 on the left or 512207 on the right.
2010 and 2011 keep the same rear numbers. The front is not documented past 2009, so match the old part or the VIN for those two years.
The handed rear pair actually starts a year earlier, in 2006, on the outgoing generation. It carries unchanged into this one.
A simpler generation than the one before it
The prior generation is covered on the 2002-2006 Camry page, which crosses three separate rear-hub eras packed into five years. This generation settles that down to one handed pair for its whole run.
The front bearing number, 510063, is the same one introduced partway through the previous generation. The 2007 Camry wheel bearing part at the front did not actually change with the redesign.
Diagnosing a Camry wheel bearing
- Confirm the exact model year, since 2010-2011 front orders need a part match rather than a catalog number.
- Note which side is noisy, because the rear hub is handed and the wrong side will not bolt up.
- Run the standard check on the bearing check page before condemning the part.
- Rule out the tires using the tire noise page, since both can sound similar at speed.
- Budget for a press on front jobs, covered on the press-in page, since 510063 is a press-in design.
Common questions
What wheel bearing does a 2007 Camry use?
The 2007 Camry wheel bearing part number at the front is 510063. The rear is handed: 512206 on the left, 512207 on the right.
What wheel bearing does a 2011 Camry use?
The rear carries the same handed pair, 512206 on the left and 512207 on the right. The front is not documented for 2011, so match the old part or the VIN.
Is the rear bearing the same on both sides?
No. This generation uses a handed rear hub, so the left and right corners take different part numbers.
Why does the front number stop being documented after 2009?
The catalogs simply end their coverage there. The generation and its hardware did not change, so matching the old part is the honest path for 2010-2011.
Does the 2006 Camry use the same rear hub as this generation?
Yes. The handed pair, 512206 and 512207, starts in 2006 on the outgoing generation and continues unchanged through 2011.