Home › Vehicles › Ford › Focus › 2000-2007 Ford Focus Wheel Bearing Part Numbers
The short version
- The 2005 Ford Focus wheel bearing chart covers the whole 2000-2007 run with one set of five numbers. Nothing changes by model year.
- Front bearings are press-in ball type, number 510056, with hub repair kit 518510 for the housing hardware.
- Rear bearing 516007 fits both ABS and non-ABS cars, but ABS cars also need sensor seal 100944.
- Rear hub repair kit is 521002, the same across every year in this generation.
The 2000-2007 Ford Focus is a rare case on this site: one set of numbers covers all eight model years. There is no year-by-year decision tree to work through here.
Just a front bearing, a rear bearing, and one seal that gets skipped more often than it should. Every 2005 Ford Focus wheel bearing question on this generation lands on the same two part numbers.
The number to know
The 2005 Ford Focus wheel bearing setup, like every year in this generation, uses front bearing 510056 and rear bearing 516007.
ABS cars need sensor seal 100944 alongside the rear bearing. Skipping it is the most common comeback on this generation.
2000-2007 Ford Focus wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2000-2007 | Front, press-in ball bearing | 510056 check price |
| 2000-2007 | Front hub repair kit | 518510 check price |
| 2000-2007 | Rear bearing, ABS and non-ABS | 516007 check price |
| 2000-2007 | Rear, ABS sensor seal | 100944 check price |
| 2000-2007 | Rear hub repair kit | 521002 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2000-2007 Ford Focus: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007. Other years live on the main Ford Focus wheel bearing page.
The rear bearing number, 516007, is the same whether the car has ABS or not. ABS cars need an extra part, sensor seal 100944, installed alongside it.
Leaving the seal off is the most common comeback on this generation. Order it every time you order the rear bearing on an ABS car.
Year by year
Nothing changes across the 2000-2007 Focus. All eight model years use the same five numbers: front bearing 510056, front hub kit 518510, rear bearing 516007, rear ABS sensor seal 100944, and rear hub kit 521002.
How this generation fits with the rest of the Focus line
Ford replaced this platform for 2008, and the next generation runs on its own numbers, covered on the 2008-2011 page. The global Focus that followed in 2012 changed again, covered on the 2012-2018 page.
Front and rear are both press-in bearings on this generation. Budget for a press rather than a bolt-on swap.
The 2005 Ford Focus wheel bearing numbers are the same set that opens this page and the same set that closes out 2007.
Diagnosing a Ford Focus wheel bearing
- Listen for a hum that grows with speed. A worn bearing usually gets louder the faster the car goes, front or rear.
- Turn the wheel and note which side gets louder. A bearing that roars more in one direction points to that side, the pattern covered in this guide.
- Check the ABS sensor if the light is on. A worn rear bearing on an ABS car can trip a fault through the sensor built into the hub.
- Rock the wheel with it off the ground. Play at 12 and 6 o’clock points to the bearing, following the standard check.
- Confirm ABS or non-ABS before ordering the rear. The bearing number is the same either way, but ABS cars also need the sensor seal.
Common questions
What is the 2005 Ford Focus wheel bearing part number?
A 2005 Ford Focus uses front bearing 510056 and rear bearing 516007. ABS cars also need sensor seal 100944 with the rear bearing.
What wheel bearing does a 2003 Ford Focus use?
The 2003 Focus uses the same numbers as every other year in this generation: front 510056 and rear 516007. Nothing changes by model year across 2000-2007.
Is the front wheel bearing on a Focus a bolt-on hub or a press-in bearing?
It is a press-in ball bearing, number 510056, not a bolt-on hub assembly. The job needs a press rather than a few bolts.
Does the Focus rear wheel bearing number change with ABS?
No. Rear bearing 516007 covers both ABS and non-ABS cars. ABS cars need an added sensor seal, 100944, which is easy to skip.
What is the rear hub repair kit number for a 2000-2007 Focus?
The rear hub repair kit is 521002, and it is the same across every year in this generation. It pairs with rear bearing 516007.