Home › Vehicles › Nissan › Nissan Versa › 2007-2012 Nissan Versa Wheel Bearing Part Numbers
The short version
- The 2012 Nissan Versa wheel bearing numbers narrow to the 1.8L engine: front 513373 and rear 512386, the same pair that covered ABS cars from 2007 to 2011.
- 2007-2011 cars split by ABS instead of engine. Four-wheel ABS cars use 513373 front and 512386 rear; cars without ABS use 513308 front and 512387 rear.
- 2012 cars without the 1.8L engine, and every 2013 model, fall outside the documented rows. Match the old part or confirm by VIN.
- Front and rear each split on their own condition, ABS through 2011, then engine size in 2012. Confirm which applies before ordering.
2007 through 2012 covers the first-generation Nissan Versa, sold in the US as a hatchback and a sedan. A 2012 Nissan Versa wheel bearing order turns on the engine, not the trim. Earlier cars in this span split by ABS instead.
Nissan Versa wheel bearing numbers at a glance
Front hub, 1.8L: 513373.
Rear hub, 1.8L: 512386.
2007-2012 Nissan Versa wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2012 | Front hub, 1.8L | 513373 check price |
| 2012 | Rear hub, 1.8L | 512386 check price |
| 2007-2011 | Front hub, 4-wheel ABS | 513373 check price |
| 2007-2011 | Front hub, without ABS | 513308 check price |
| 2007-2011 | Rear hub, 4-wheel ABS | 512386 check price |
| 2007-2011 | Rear hub, without ABS | 512387 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2007-2012 Nissan Versa: 2007, 2008, 2009, 2010, 2011, 2012. Other years live on the main Nissan Versa wheel bearing page.
Through 2011, ABS decided the Versa’s front and rear numbers. In 2012 that split disappears, and the documented rows narrow to the 1.8L engine only.
A 2012 Nissan Versa wheel bearing order needs the engine confirmed, not just the year.
Year by year
2007 through 2011 split by ABS at both ends. Four-wheel ABS cars use 513373 front and 512386 rear, and cars without ABS use 513308 front and 512387 rear.
2012 rows only cover the 1.8L engine, on the same 513373 front and 512386 rear that covered ABS cars the year before. A 2012 car with a different engine falls outside the documented rows.
2013 onward belongs to the next Versa and is not covered on this page; match the old part or confirm by VIN for any car outside the documented spans.
One generation, two ways to split it
This Versa ran six model years without a body change, but the catalogs still split it twice: by ABS through 2011, then by engine in 2012. That is unusual, and it makes the 2012 rows the ones to read closely.
The numbers for 2013 and later belong to the next generation and are not on this page, once that redesign takes over fully.
Diagnosing a 2007-2012 Nissan Versa wheel bearing
- Check for ABS on 2007-2011 cars. Four-wheel ABS trims and non-ABS trims take different hubs at both ends. See drive type and wheel bearings for how trim details change the part.
- Confirm the engine on a 2012 car. Only the 1.8L rows are documented for that year, so check under the hood before ordering.
- Jack up the wheel and rock it. Play at twelve and six o’clock points to the bearing rather than the tire. See how to check a wheel bearing.
- Watch the ABS light along with the noise. A failing hub can trip the light as its sensor wears. See a bad bearing and the ABS light.
- Rule out the tires first. Uneven wear can sound like a bearing hum at speed. See tire noise or wheel bearing.
Common questions
What wheel bearing does a 2012 Nissan Versa use?
A 2012 Nissan Versa wheel bearing on the 1.8L engine is 513373 front and 512386 rear. Any other 2012 engine falls outside the documented rows; match the old part or confirm by VIN.
What wheel bearing does a 2009 Nissan Versa use?
A 2009 Versa splits by ABS. Four-wheel ABS cars use 513373 front and 512386 rear, and cars without ABS use 513308 front and 512387 rear.
Why do the 2012 rows only cover one engine?
The catalogs only carry the 1.8L rows for 2012. Any other 2012 engine has to be matched to the old part.
Does ABS still matter in 2012?
No. The 2012 rows are split by engine, not ABS. That is a change from every earlier year in this generation.
What wheel bearing does a 2013 Nissan Versa use?
2013 belongs to the next generation and is not covered by these rows. Check the old part or confirm by VIN before ordering.