Home › Vehicles › GMC › GMC Acadia › 2007-2016 GMC Acadia Wheel Bearing Part Numbers
The short version
- A 2008 GMC Acadia wheel bearing job for 2007-2016 needs one number: 513277, front or rear, either drivetrain.
- Front and rear take the identical hub assembly, so there is no separate rear listing to hunt down.
- Front wheel drive and all wheel drive Acadias share the same part across the whole ten year run.
- 2017 brings a new body and a different number, covered on the Acadia’s other generation page.
2007-2016 covers the first generation GMC Acadia, and the fitment picture stays simple. A 2008 GMC Acadia wheel bearing replacement uses hub assembly 513277 at any corner, on either drivetrain.
The core number
Front and rear, front wheel drive or all wheel drive: hub assembly 513277.
The same number covers every trim built across 2007-2016.
GMC Acadia wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2007-2016 | Front and rear hub, FWD or AWD | 513277 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2007-2016 GMC Acadia: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016. Other years live on the main GMC Acadia wheel bearing page.
513277 sits at all four corners, and that trips people up. The instinct is to order a front pair, then hunt for a separate rear listing that does not exist here.
One hub assembly, ordered once per corner that needs it, covers the entire truck. There is no separate front kit or rear kit to compare against.
Year by year
Nothing about the number changes across the ten model years in this range. A 2008 GMC Acadia wheel bearing order looks identical to one placed for a 2015 truck.
2017 is where the story changes. That model year brings a new body and a different hub number. It lives on the Acadia’s other generation page, not here.
Where this generation sits in the Acadia lineup
This body style runs the full decade from 2007 to 2016 without a mid cycle parts change. The 2017-2018 Acadia moves to a new platform and hub number a year before its badge mates.
Anyone unsure which corner is failing should start with how to check a wheel bearing first. Confirming the corner before ordering saves a return trip to the parts counter, since the number itself never changes between them.
Diagnosing a GMC Acadia wheel bearing
- Listen for a hum that builds with speed. A failing hub grows louder as road speed increases and often changes pitch in a turn.
- Jack up the noisy corner. Grip the tire at 12 and 6 o’clock and rock it to feel for play in the hub.
- Check the ABS light. A worn bearing can damage the sensor built into the hub and trigger a bad bearing ABS light.
- Confirm the corner before ordering. Since one number covers the whole truck, the only real question is which corner needs the part.
- Pull the old hub if anything looks unusual. Reading its number is the fastest way to rule out a prior repair with a different part, and it confirms the corner before the new hub goes in.
Common questions
What wheel bearing does a 2008 GMC Acadia use?
A 2008 GMC Acadia wheel bearing is hub assembly 513277. That number covers front and rear, FWD or AWD.
Is the wheel bearing the same on a 2016 Acadia as a 2008 one?
Yes. 513277 holds across the entire 2007-2016 run with no changes by year.
Does the front bearing differ from the rear on this Acadia?
No. Both corners use the identical hub assembly, which is the detail that trips up a lot of orders and leads to buying two different part numbers by mistake.
Does all wheel drive change the Acadia’s wheel bearing number?
No. 513277 covers both front wheel drive and all wheel drive trucks in this generation.
What changes when the Acadia reaches 2017?
The 2017 model year brings a new body and a different hub number. That number sits on the Acadia’s other generation page, not this one.