Home › Vehicles › Dodge and Ram › Dodge Magnum › 2005-2008 Dodge Magnum Wheel Bearing Part Numbers
The short version
- The 2005 Dodge Magnum wheel bearing lineup runs 2005 through 2008 with the front decided by drivetrain.
- Front: rear wheel drive cars take HA590030, all wheel drive cars take HA590142.
- Rear: HA590142 for every Magnum, RWD or AWD alike.
- All three listings use Timken’s HA prefix rather than the usual 513xxx pattern.
Four model years, 2005 through 2008, and one number quietly covers two different jobs. HA590142 is both the AWD front and every rear on this car.
Magnum wheel bearing numbers at a glance
Rear wheel drive Magnums use HA590030 up front. All wheel drive cars use HA590142 up front instead.
The rear is HA590142 for every car in this range, no matter which drivetrain it has.
Dodge Magnum wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2005 to 2008 | Front, rear wheel drive | HA590030 check price |
| 2005 to 2008 | Front, all wheel drive | HA590142 check price |
| 2005 to 2008 | Rear, all drivetrains | HA590142 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2005-2008 Dodge Magnum: 2005, 2006, 2007, 2008. Other years live on the main Dodge Magnum wheel bearing page.
HA590142 covers two positions. It is the all wheel drive front and it is the rear for every Magnum. Only the rear wheel drive front takes a different number, HA590030.
These are Timken HA prefix listings, not the 513xxx style numbers used elsewhere on this site. Double check the prefix when cross shopping.
Year by year
2005 through 2008 use the same three rows without any change across the run. This 2005 Dodge Magnum wheel bearing picture holds steady the whole time: drivetrain, not model year, decides the front, and the rear stays HA590142 either way.
Checking drivetrain before ordering
This 2005 Dodge Magnum wheel bearing question comes down to drivetrain from the start. Rear wheel drive and all wheel drive cars need different fronts. See drive type and wheel bearings for more on why that split matters.
HA590142 fits two different jobs on the same car. It pays to confirm which position is being replaced before the part ships.
Diagnosing a Dodge Magnum wheel bearing
- Confirm the drivetrain first. Rear wheel drive and all wheel drive Magnums need different front numbers.
- Listen for a hum that changes with speed. That pattern points to a bearing rather than tire wear.
- Rock the wheel at 12 and 6 o’clock. Play at the hub identifies the failing corner, front or rear.
- Watch for ABS warnings on the dash. See bad bearing and the ABS light for how a bearing fault can trigger one.
- Double check the part prefix. These are Timken HA numbers, so confirm the prefix matches before installing.
Common questions
What wheel bearing does a 2005 Dodge Magnum use?
A 2005 Dodge Magnum wheel bearing order needs HA590030 front for rear wheel drive or HA590142 front for all wheel drive. The rear is HA590142 either way.
What wheel bearing does a 2008 Dodge Magnum use?
The 2008 Magnum uses the same numbers as 2005: HA590030 or HA590142 front by drivetrain, and HA590142 rear for both.
Why is HA590142 listed for both the front and the rear?
It covers the all wheel drive front and it covers the rear on every Magnum regardless of drivetrain. That is why it shows up twice on the table.
How do I know if my Magnum is rear wheel drive or all wheel drive?
Check the build sheet or the VIN decode. The two drivetrains look similar underneath but need different front numbers.
Are these Magnum numbers the same style as other cars on this site?
No. These are Timken HA prefix listings rather than the 513xxx style numbers used on many other model pages.