Home › Vehicles › Nissan › Nissan Quest › 1999-2002 Nissan Quest Wheel Bearing Part Numbers
The short version
- A 2000 Nissan Quest wheel bearing is 510028 at the front, a press in ball bearing, and 512219 at the rear hub.
- The rear hub also carries a parallel Timken listing, HA590057, for the same position.
- Nothing changes across 1999, 2000, 2001 or 2002; every year on this page takes the same front and rear parts.
- The front comes out with a press, not a bolt, so the knuckle has to come off or be supported to swap it.
This page covers the 1999 to 2002 Nissan Quest. Only two positions matter for the whole span. A 2000 Nissan Quest wheel bearing is 510028 up front and 512219 or HA590057 at the rear, and none of those numbers change anywhere in this four year run.
Quest front and rear numbers at a glance
510028 is a press in ball bearing, not a bolt on hub. It sits at the front on every year covered here.
512219 is the rear hub’s primary listing. HA590057 is a parallel Timken listing for that same rear position.
Nissan Quest wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 1999 to 2002 | Front, press in ball bearing | 510028 check price |
| 1999 to 2002 | Rear hub | 512219 check price |
| 1999 to 2002 | Rear hub, parallel Timken listing | HA590057 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 1999-2002 Nissan Quest: 1999, 2000, 2001, 2002. Other years live on the main Nissan Quest wheel bearing page.
The front on this Quest is a press in ball bearing, not a bolt on hub. It comes out under a press, and the knuckle typically needs to come off or be supported first.
The two rear listings, 512219 and HA590057, are parallel listings for one position. Match the number the old part carries rather than picking between them.
The catalogs also disagree on when the rear hub listing begins, one running it from 1997 and the other from 1999. Every year on this page falls inside both ranges, so the disagreement does not affect a 1999 to 2002 Quest.
Year by year
Nothing changes across 1999, 2000, 2001 and 2002. A 2000 Nissan Quest wheel bearing takes the same 510028 front and 512219 or HA590057 rear as every other year in this run.
The front ball bearing listing actually reaches back well before 1999, into earlier Quest years outside this page’s range. Inside 1999 to 2002 though, no year takes a different front or rear part.
Two Quest eras, two front designs
The later Quest, covered on the 2004-2009 Quest page, moves the front to a bolt on hub. The press in arrangement covered here is the older setup.
A listing found for that later van does not carry over to the 1999 to 2002 Quest, and the reverse holds as well.
Diagnosing a Nissan Quest wheel bearing
- Listen for a hum that builds with speed. A wheel bearing typically drones louder as road speed climbs; see wheel bearing noise on a turn.
- Expect a press job up front, not a bolt off. The front position is a press in ball bearing; see press in wheel bearing service before starting.
- Watch the ABS light during the test drive. A code alongside a growing noise narrows the search; see a bad bearing and the ABS light.
- Rule out tire wear first. Cupped or uneven tread can mimic bearing noise; tire noise or wheel bearing covers telling the two apart.
- Confirm with a basic check before buying. How to check a wheel bearing covers the hands on steps for either end.
Common questions
What wheel bearing does a 2000 Nissan Quest use?
A 2000 Nissan Quest wheel bearing is 510028 at the front and 512219 or HA590057 at the rear. The front is a press in ball bearing, and the two rear numbers are parallel listings for the same position.
What rear wheel bearing does a 1999 Nissan Quest need?
A 1999 Nissan Quest rear wheel bearing is 512219, or HA590057 on the parallel Timken listing. Match whichever number the old part carries; the two are not a free choice.
Is the Nissan Quest front wheel bearing press in or bolt on?
Press in. The 1999 to 2002 Quest front is 510028, a press in ball bearing that comes out under a press rather than off a bolt pattern.
Do the two rear listings mean either number works?
No. 512219 and HA590057 are parallel listings for one rear position, not interchangeable options. The number on the old part should decide which one goes back on.
Why do the catalogs disagree on when the rear hub starts?
One catalog lists the rear hub from 1997 and the other from 1999. Since this page only covers 1999 through 2002, both ranges agree for every year listed here.