Home › Vehicles › Nissan › Nissan Versa › 2013-2019 Nissan Versa Wheel Bearing Part Numbers
The short version
- The 2014 Nissan Versa wheel bearing question covers the full 2013 to 2019 generation. WE60350 covers the front and WE60348 the rear, the same two numbers the whole span.
- The Versa Note hatchback joins the same listing from 2014 on. It uses the identical WE60350 front and WE60348 rear numbers as the sedan.
- These are bare press bearings, not hub assemblies. That is a change from the 2007 to 2012 car, which used bolt on hubs at all four corners.
- Nothing is documented for 2020 or later. A Versa from that year has to be matched off the old part or the VIN.
Between 2013 and 2019, the Nissan Versa runs on two wheel bearing numbers across both body styles. WE60350 covers the front, and WE60348 the rear. Neither number splits between the sedan and the Versa Note hatchback that joins from 2014.
What the 2014 Nissan Versa wheel bearing job needs
One front number and one rear number cover the sedan for all seven years. The Versa Note picks up the identical pair starting in 2014.
There is no year split inside the span. There is no separate hatchback listing to track either.
2013 to 2019 Nissan Versa wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2020 | Front and rear | not documented, match old part or VIN |
| 2014 to 2019 | Front bearing, Versa Note | WE60350 check price |
| 2014 to 2019 | Rear bearing, Versa Note | WE60348 check price |
| 2013 to 2019 | Front bearing | WE60350 check price |
| 2013 to 2019 | Rear bearing | WE60348 check price |
Lookups run through the cross reference page.
This page covers the 2013 to 2019 Nissan Versa: 2013, 2014, 2015, 2016, 2017, 2018, 2019. Other years live on the main Versa wheel bearing page.
This is a press job, not a bolt on hub swap. The 2013 to 2019 Versa is listed as bare bearings, WE60350 front and WE60348 rear, not hub assemblies. The 2007 to 2012 Versa used bolt on hubs at all four corners instead.
Those older numbers were WE60515 and WE60516 front, WE60517 and WE60518 rear. A reader coming from the older car should not expect the same repair or the same tools this time. Nothing is documented for 2020 or later.
Year by year
2013 is sedan only in the catalogs and runs on WE60350 front and WE60348 rear.
2014 through 2019 add the Versa Note under the identical two numbers. The hatchback and the sedan never diverge in this 2014 Nissan Versa wheel bearing listing.
2020 opens a new car that the catalogs do not reach.
A press job, unlike the older Versa
The 2007 to 2012 Versa bolted on complete hub assemblies at both ends. That job is covered on the 2007 to 2012 Versa page. From 2013 the car switches to bare bearings instead.
Those bearings have to be pressed in and out of the knuckle, a different process explained on the press in bearing guide. The part numbers do not carry across the two generations.
Diagnosing a 2014 Nissan Versa wheel bearing
- Listen for the noise pattern. A worn bearing hums or grinds and gets louder with speed. See how bearing noise changes in turns for the pattern to listen for.
- Check for play at the wheel. Jack up the corner and grab the tire at twelve and six. Rock it; looseness points at the bearing rather than the tire.
- Rule out other causes first. Run through a full bearing check before assuming the noise is the bearing.
- Confirm the body style. Sedan and Versa Note share the same numbers from 2014 on. This step only matters on a 2013 sedan.
- Plan for a press, not a swap. These are bare bearings, so the job needs a press and the correct adapters.
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Common questions
What wheel bearing does a 2014 Nissan Versa use?
A 2014 Versa uses WE60350 up front and WE60348 at the rear. The Versa Note takes the identical two numbers starting that same year.
What wheel bearing does a 2013 Nissan Versa use?
A 2013 Versa uses the same WE60350 front and WE60348 rear numbers. 2013 is sedan only in the catalogs, since the Versa Note listing starts in 2014.
Does the Versa Note use a different bearing than the sedan?
No. From 2014 on, the Versa Note shares WE60350 front and WE60348 rear with the sedan. There is no separate hatchback listing.
Is this a hub assembly or a bare bearing?
A bare bearing on both ends for 2013 to 2019, which means a press job rather than a bolt on swap. The 2007 to 2012 Versa used hub assemblies instead. Those numbers do not carry forward.
What wheel bearing does a 2020 Nissan Versa use?
Nothing is documented for 2020 or later in the catalogs on hand. Match the old part or the VIN rather than assume the 2013 to 2019 numbers still apply. That is the short version of any 2014 Nissan Versa wheel bearing lookup that strays past 2019.