Home › Vehicles › Nissan › Nissan Versa
The short version
- A Versa wheel bearing splits on ABS fitment at both ends from 2007 to 2011. That is the whole question on the older cars.
- 513373 is cited for the front with ABS and 513308 without. The rear is 512386 with and 512387 without.
- 2012 adds a second split, by engine. A 1.6 liter number joins the 1.8 liter one at both ends.
- From 2013 the listings consolidate to one number per end, WE60350 front and WE60348 rear, through 2019.
On a budget car, features that later became standard were once boxes you ticked. Antilock braking was one of them on the 2007 to 2021 Versa, and it changed the hub.
Why ABS changes the part
513373 is cited for front hubs with four wheel antilock brakes and 513308 for cars without.
The rear follows the same split, 512386 with ABS and 512387 without.
The magnetic ring that the speed sensor reads is built into the bearing seal. No ABS meant no ring, and a different part follows from that.
The 2012 engine split
2012 is a transition year. A 1.6 liter car takes its own front and rear parts, WE60350 and WE60348, alongside the familiar 1.8 liter numbers.
From 2013 the range settles onto WE60350 front and WE60348 rear for every Versa. No further split by ABS or engine applies.
The plain Versa and the Versa Note carry the same numbers from 2013 onward in the catalogs checked. That is a genuine overlap, not a reason to treat the two as one page.
Order by the number on the old part either way. A Note owner and a sedan owner reading the same digits off a box are both reading them correctly.
Versa wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2020 to 2021 | Front and rear, past the catalogs | match old part or VIN |
| 2013 to 2019 | Front | WE60350 check price |
| 2013 to 2019 | Rear | WE60348 check price |
| 2012 | Front, 1.8 liter | 513373 check price |
| 2012 | Front, 1.8 liter, parallel listing | WE60515 check price |
| 2012 | Front, 1.6 liter | WE60350 check price |
| 2012 | Rear, 1.8 liter | 512386 check price |
| 2012 | Rear, 1.8 liter, parallel listing | WE60517 check price |
| 2012 | Rear, 1.6 liter | WE60348 check price |
| 2007 to 2011 | Front, with four wheel ABS | 513373 check price |
| 2007 to 2011 | Front, four wheel ABS, parallel listing | WE60515 check price |
| 2007 to 2011 | Front, without ABS | 513308 check price |
| 2007 to 2011 | Front, without ABS, parallel listing | WE60516 check price |
| 2007 to 2011 | Rear, with four wheel ABS | 512386 check price |
| 2007 to 2011 | Rear, four wheel ABS, parallel listing | WE60517 check price |
| 2007 to 2011 | Rear, without ABS | 512387 check price |
| 2007 to 2011 | Rear, without ABS, parallel listing | WE60518 check price |
| 2007 to 2009 | Front, parallel listing, no ABS split stated | HA590285 check price |
| 2007 to 2009 | Rear, ABS, parallel listing | HA590288 check price |
| 2007 to 2009 | Rear, without ABS, parallel listing | HA590286 check price |
Lookups run through the cross reference page.
Every model year this chart resolves: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019. A 2020 or 2021 Versa sits past the catalogs and goes by the old part or the VIN.
ABS, engine size and the catalog itself all change which number applies to a 2007 through 2012 Versa. None of the parallel listings above is wrong, they are simply different catalogs naming the same part.
Match the number stamped on the old part rather than picking a catalog to trust. That settles ABS, engine and generation all at once.
How to tell whether it has ABS
Watch the dash at startup for an ABS light that comes on and then goes out. That is the system testing itself.
A sensor wire at the hub is another sign. The build sticker or window sticker settles it if you still have one.
Fitting a non ABS hub to a car with ABS lights the dash on the first drive. The encoder has to face the sensor correctly too, which is on the orientation page.
None of that is specific to Versa. Any encoder equipped hub behaves the same way if it goes in facing the wrong side.
The impact warning
Nissan warns across its range that a single hard hit on a curb or pothole can damage the races. Nothing shows afterward.
On a light car with small wheels and short sidewalls, that explains noise with no play. That case is on the pothole page. General failure patterns are on the failure page.
Diagnosing a Versa wheel bearing
- Confirm whether the car has ABS before ordering anything.
- Check the engine size on a 2012 car specifically.
- Ask what it has hit, since impact explains noise without play.
- Weave at road speed and note which side loads the noise.
- Rock the wheel at twelve and six before buying a hub.
Those checks are on the checking page and the tire noise page.
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Common questions
Which Versa wheel bearing do I need?
Check ABS first for a 2007 to 2011 car. 513373 is cited with it and 513308 without, at the front.
What changed in 2012?
A 1.6 liter engine option added its own front and rear numbers. The familiar 1.8 liter ones stayed too.
Does the Versa Note use the same part?
From 2013 the catalogs show the same numbers for both, but this page covers the plain Versa specifically.
What about a 2020 or later?
Nothing is documented in the catalogs checked. Match the old part or the VIN.
Do I need a press?
No. These use bolt on hub units at both ends.