Home › Vehicles › Audi › Audi Q5 › 2009-2017 Audi Q5 Wheel Bearing Part Numbers
The short version
- The 2015 Audi Q5 wheel bearing lineup runs 2009 through 2017 with two parallel front listings and a VIN based rear.
- Front: aftermarket kit BR930817K or Audi OEM number 8K0407607, matched to the old part.
- Rear: no single number exists; it is its own listing, matched by VIN.
- All nine model years share the same front and rear picture, with no year to year change.
Nine model years, 2009 through 2017, and this Q5 never settles on a single style of part number. Not at either end.
Q5 wheel bearing numbers at a glance
The front comes as an aftermarket kit under BR930817K or an Audi OEM number under 8K0407607.
The rear has no single listing here at all. It is matched by VIN instead.
Audi Q5 wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2009 to 2017 | Front kit, aftermarket | BR930817K check price |
| 2009 to 2017 | Front, Audi OEM | 8K0407607 check price |
| 2009 to 2017 | Rear kit | own listing, match by VIN |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2009-2017 Audi Q5: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017. Other years live on the main Audi Q5 wheel bearing page.
The front has two parallel listings. BR930817K is an aftermarket kit and 8K0407607 is the Audi OEM number. Match the number the old part carries rather than treating them as a free choice.
The rear has no comparable listing on this page. It is its own listing, matched by VIN for every year in the range.
Year by year
2009 through 2017 use the same front pair and the same VIN based rear without any change. This 2015 Audi Q5 wheel bearing trap is the same in 2009 as it is in 2017.
Reading a kit versus an OEM number
This 2015 Audi Q5 wheel bearing question does not follow the usual 513xxx pattern seen on many other model pages. Instead the front sits as an aftermarket kit alongside the Audi OEM part. Matching the old part decides which one to buy.
The rear is a bigger step down in documentation. It never resolves to a shared number, so it needs the VIN every time.
Diagnosing an Audi Q5 wheel bearing
- Pull the old front part before ordering. Compare it against BR930817K and 8K0407607 rather than guessing between them.
- Run the VIN for a rear replacement. No shared rear number exists on this page for any year.
- Listen for a hum that builds with speed. That points to a bearing rather than tire wear.
- Rock the wheel at 12 and 6 o’clock. Play at the hub identifies the failing corner, front or rear.
- Check for ABS or all wheel drive warnings. See bad bearing and the ABS light for how a bearing fault can show up.
Common questions
What wheel bearing does a 2015 Audi Q5 use?
A 2015 Audi Q5 wheel bearing order needs either BR930817K or 8K0407607 up front, matched to the old part. The rear is a VIN matched kit.
What wheel bearing does a 2009 Audi Q5 use?
The 2009 Q5 uses the same front pair as 2015, BR930817K or 8K0407607, and the same VIN matched rear.
Are BR930817K and 8K0407607 interchangeable front parts?
No. They are parallel listings for the same position, and the correct one matches whatever part is already on the car.
Why is there no rear wheel bearing number for the Q5?
The rear never resolves to a single shared listing here. It is treated as its own listing and matched by VIN instead.
Does the Q5 front wheel bearing come as a full kit?
Yes, at least under the aftermarket BR930817K listing, while the Audi OEM number is documented separately as 8K0407607.