Home › Vehicles › BMW › BMW X1 Wheel Bearing Part Numbers
The short version
- The front BMW X1 wheel bearing splits by generation. E84 (2012-2015) uses 513254 for RWD sDrive or 513332 for AWD xDrive. F48 (2016-2018) uses one number, 513390, for every trim.
- Rear E84 hubs use 512549 across the board. F48 rear hubs use 512582 for 2016 and for 2017-2018 xDrive models.
- The 2016 F48 launch changes every part number at once. An E84 number never carries over to an F48 X1.
- The F48 front hub carries an M12x1.25 stud spec worth checking against the old hardware.
BMW split the X1 into two distinct engineering generations sold under one nameplate, the E84 and the F48. The wheel bearing lineup resets completely at that boundary. The build date, not the badge, settles which generation a given X1 belongs to.
BMW X1 wheel bearing quick reference
The BMW X1 wheel bearing front number depends on generation and drivetrain on the E84. It simplifies to one front number on the F48.
Rear hubs follow the same generation split. The F48 rear number is confirmed for 2016 across the lineup and for xDrive in 2017 and 2018.
BMW X1 wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2016-2018 | F48 front hub, all trims | 513390 check price |
| 2016 | F48 rear hub, all trims | 512582 check price |
| 2017-2018 | F48 rear hub, xDrive AWD | 512582 check price |
| 2012-2015 | E84 front hub, sDrive RWD | 513254 check price |
| 2012-2015 | E84 front hub, xDrive AWD | 513332 check price |
| 2012-2015 | E84 rear hub, all trims | 512549 check price |
Every model year this chart resolves: 2012, 2013, 2014, 2015, 2016, 2017 and 2018.
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
Generation flip: every BMW X1 wheel bearing number changes at the 2016 split between the E84 and the F48. An E84 front or rear number will not fit an F48. Both cars wear the same nameplate, but that is where the similarity ends.
The catalogs do not carry a clean 2017-2018 sDrive rear number apart from the AWD listing. Match the old part or the VIN on a front-wheel-drive F48 from those years.
Shared platform, split lineage
The E84 X1 rode on BMW’s older RWD-based compact platform, related in era to the 3 Series. The F48 moved to the front-drive-based platform shared with later small BMWs. That switch, not a running change, is why the hub hardware resets in 2016.
Buyers cross-shopping hubs against the X3 should treat it as a separate parts family. The X3 stayed on BMW’s larger platform the whole time.
A stud spec worth checking on the F48
The F48 front hub listing carries an M12x1.25 stud spec note. It is worth matching against the hardware coming off the car. Getting the stud thread wrong is an easy way to end up with a wheel that will not seat properly.
Across the rest of the BMW model lineup, the same rule holds. Platform generation drives the hub number far more than trim level does.
Diagnosing a BMW X1 wheel bearing
- Listen for a load-sensitive hum. A bad wheel bearing drones louder as speed increases, not with engine RPM.
- Weight-shift on the highway. Gently swerving side to side shifts load across each bearing. The hum should get louder on the bad side.
- Jack it up and rock the wheel. Grip the tire at opposite edges and check for play. Looseness there means the bearing, not the tire.
- Check for ABS or DSC warnings. The wheel speed sensor ring lives inside the hub. A failing bearing can trip a stability control light.
- Confirm on a curve. Cornering loads the bearing unevenly. A noise that changes pitch through a turn backs up the diagnosis.
Common questions
What is the BMW X1 wheel bearing part number?
It depends on generation and drivetrain. E84 models from 2012-2015 use 513254 up front for sDrive or 513332 for xDrive, with 512549 at the rear. F48 models from 2016-2018 use 513390 up front and 512582 at the rear.
Do E84 and F48 X1 models share wheel bearings?
No. The 2016 switch from the E84 to the F48 changes every BMW X1 wheel bearing number, front and rear alike.
Does the front bearing differ between sDrive and xDrive?
Yes on the E84. The RWD sDrive uses 513254 and the AWD xDrive uses 513332. The F48 uses a single front number, 513390, regardless of drivetrain.
Is there a rear bearing number for a 2017 or 2018 sDrive X1?
The catalogs only confirm 512582 for xDrive rear hubs in those years. For a front-wheel-drive F48, match the old part or the VIN.
Does the X1 share bearings with the 3 Series or the X3?
The E84 X1 relates to BMW’s older RWD-based compact cars from the same era. The catalogs still list its own hub numbers rather than pointing to the 3 Series or the X3 directly.