Home › Vehicles › Buick › Buick Enclave › 2008-2017 Buick Enclave Wheel Bearing Part Numbers
The short version
- A 2008 Buick Enclave wheel bearing job for 2008-2017 uses one number, 513277, front and rear, either drivetrain.
- All ten model years in this generation share the identical hub assembly.
- Front wheel drive and all wheel drive Enclaves take the same part.
- 2018 brings a new number, covered on the Enclave’s main page rather than here.
2008-2017 covers the first generation Buick Enclave, and one number does the whole job. A 2008 Buick Enclave wheel bearing replacement uses hub assembly 513277 at any corner, on either drivetrain.
The core number
Front and rear, front wheel drive or all wheel drive: hub assembly 513277.
The same number covers every trim built across 2008-2017.
Buick Enclave wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2008-2017 | Front and rear hub, FWD or AWD | 513277 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2008-2017 Buick Enclave: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017. Other years live on the main Buick Enclave wheel bearing page.
513277 sits at all four corners for this entire generation, and that surprises people used to separate front and rear listings. One hub assembly covers the truck, ordered once per corner that needs it.
2018 is where the number changes. That model year and later sit on the Enclave’s main page, not this one, and the two listings should never be mixed.
Year by year
Nothing about the number changes across the ten model years here. A 2008 Buick Enclave wheel bearing order looks identical to one placed for a 2016 truck.
2018 is where the story changes, with a new number that lives on the Enclave’s main page instead.
Where this generation sits in the Enclave lineup
This body style runs the full decade from 2008 to 2017 on one settled number, with no mid cycle changes to track. A hum that grows with speed is the classic first symptom; read wheel bearing noise on a turn for what to listen for.
Anyone unsure which corner is actually failing should start with how to check a wheel bearing before ordering the part twice. Confirming the corner first saves a second trip to the counter, since the number never changes between them.
Diagnosing a Buick Enclave wheel bearing
- Listen for a hum that builds with speed. A failing hub grows louder as road speed increases and often changes pitch in a turn.
- Jack up the noisy corner. Grip the tire at 12 and 6 o’clock and rock it to feel for play in the hub.
- Check the ABS light. A worn bearing can damage the sensor built into the hub and trigger a bad bearing ABS light.
- Confirm the corner before ordering. Since one number covers the whole truck, the only real question is which corner needs the part.
- Pull the old hub if anything looks unusual. Reading its number rules out a prior repair with a different part.
Common questions
What wheel bearing does a 2008 Buick Enclave use?
A 2008 Buick Enclave wheel bearing is hub assembly 513277. That number covers front and rear, FWD or AWD.
Is the wheel bearing the same on a 2017 Enclave as a 2008 one?
Yes. 513277 holds across the entire 2008-2017 run with no changes by year.
Does the front bearing differ from the rear on this Enclave?
No. Both corners use the identical hub assembly, which is the detail that trips up a lot of orders and leads to buying two different part numbers by mistake.
Does all wheel drive change the Enclave’s wheel bearing number?
No. 513277 covers both front wheel drive and all wheel drive trucks in this generation.
What changes when the Enclave reaches 2018?
The 2018 model year brings a new number, which sits on the Enclave’s main wheel bearing page rather than this one.