Home › Vehicles › Cadillac › Cadillac Escalade › 2007-2014 Cadillac Escalade Wheel Bearing Part Numbers
The short version
- A 2007 Cadillac Escalade wheel bearing job for 2007-2014 runs front hub 515096 on AWD or 4WD, 515097 on 2WD, and a solid rear axle.
- One AWD number and one 2WD number cover all eight years without a break.
- The Escalade EXT rides the same AWD hub, but that pickup body ends at 2013, a year before the SUV.
- These numbers also serve the Suburban, Tahoe, and Yukon built on the same platform.
2007-2014 spans eight years on one steady pair of front hub numbers. A 2007 Cadillac Escalade wheel bearing job at the front uses the same number as the last truck built in this body, in 2014.
The core numbers
Front, AWD or 4WD: hub 515096. Front, 2WD: hub 515097.
Rear: solid axle, no hub assembly, across the entire generation.
Cadillac Escalade wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2007-2014 | Front hub, AWD or 4WD | 515096 check price |
| 2007-2014 | Front hub, 2WD | 515097 check price |
| 2007-2013 | Front hub, Escalade EXT | 515096 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2007-2014 Cadillac Escalade: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014. Other years live on the main Cadillac Escalade wheel bearing page.
These numbers also cover the Suburban, Tahoe, and Yukon of the same era, so a counter lookup often turns up a different badge on the same part. That is expected, not a mistake.
The pickup bodied EXT ends production in 2013, a year before the standard Escalade. Confirm the body style before assuming a 2014 listing applies.
Year by year
2007 through 2014 use the same two front hub numbers without a break. A 2007 Cadillac Escalade wheel bearing job matches a 2014 one exactly, drivetrain for drivetrain.
The EXT follows the AWD number, 515096, but stops at 2013 since that body was discontinued a year before the SUV.
The rear stays solid axle territory for the entire generation, with no hub assembly at any point.
Where this generation sits in the lineup
This body’s front hub numbers replace the parallel-listing pair used on the 2002-2006 Escalade with one clean number per drivetrain. That earlier pair does not carry forward past 2006.
The rear axle setup itself is a separate subject from hub replacement. Read axle bearing versus wheel bearing before ordering rear parts, since no hub number applies at that corner.
Diagnosing an Escalade wheel bearing
- Listen for a speed-sensitive hum. A failing hub bearing changes pitch with road speed and grows louder in a curve.
- Jack up the noisy corner. Grip the tire at twelve and six o’clock and rock it to check for play at the hub.
- Confirm the drivetrain before ordering. 515096 and 515097 are not interchangeable between AWD/4WD and 2WD.
- Check for a wheel speed sensor fault. A failing hub on this generation can trip an ABS code before it gets loud.
- Confirm the body style on an EXT. That pickup ends at 2013, a year earlier than the standard SUV.
Common questions
What wheel bearing does a 2007 Cadillac Escalade use?
A 2007 Cadillac Escalade wheel bearing is front hub 515096 on AWD or 4WD, or 515097 on 2WD, plus a solid rear axle.
Does the front hub number change for the 2014 model year?
No. 2014 is the last year of this body and uses the same 515096 and 515097 numbers as 2007.
Is the front hub the same on a Suburban and an Escalade this generation?
Yes, on the AWD/4WD side. 515096 covers the Escalade, Suburban, Tahoe, and Yukon built on this platform.
Does the Escalade EXT use the same front hub as the SUV?
Yes, the AWD number 515096, but only through 2013. The EXT body was discontinued a year before the standard SUV.
Is the rear bearing a hub assembly on this Escalade?
No. The rear axle is a solid axle setup with no hub assembly across the full 2007-2014 run.