Home › Vehicles › Chevy › Impala › 2014-2020 Chevy Impala Wheel Bearing Part Numbers
The short version
- 2014 Chevy Impala wheel bearing numbers use a single part, 513288, for front and rear alike, and that same number covers every 2014-2017 Impala.
- 2018 models move to a new shared number, 513282, again used front and rear.
- 2019 and 2020 are not documented in the catalogs. Match the old part or the VIN, with 513282 as the closest reference.
- Fleet buyers could still order a 2014-2016 Impala Limited, the previous body carried over. Those cars stay on the older 513179 front and 512357 rear numbers.
This page covers the 2014 through 2020 Chevy Impala, the redesigned sedan that replaced the previous W-body generation in retail showrooms. A 2014 Chevy Impala wheel bearing order comes down to one number for most of the run. The one catch is the fleet-only Impala Limited.
Impala wheel bearing numbers at a glance
Front and rear hub, same part both ends: 513288 for 2014-2017.
2018 models use 513282, also shared front and rear.
2014-2020 Chevy Impala wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2018 | Front and rear hub | 513282 check price |
| 2014-2017 | Front and rear hub, same number both ends | 513288 check price |
| 2014-2016 (Impala Limited) | Front hub, fleet carryover body | 513179 check price |
| 2014-2016 (Impala Limited) | Rear hub, fleet carryover body | 512357 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2014-2020 Chevy Impala: 2014, 2015, 2016, 2017, 2018, 2019, 2020. Other years live on the main Impala wheel bearing page.
Chevrolet kept building the previous generation body for fleet buyers through 2016, and sold it as the Impala Limited alongside the new redesigned car. Those Limited units stay on the old 513179 front and 512357 rear numbers.
A 2014, 2015, or 2016 Impala needs a body check before ordering. Confirm which generation it actually is, rather than assuming the new number applies.
Year by year
2014 through 2017 Impalas share one number, 513288, at both the front and the rear. A 2014 Chevy Impala wheel bearing order stays simple as long as the car is the redesigned model, not a Limited.
2018 brings a new shared number, 513282, again used at all four corners equally. Nothing else about the ordering process changes that year.
2019 and 2020 are not documented separately in the catalogs. 513282 remains the closest reference, and the actual order should match the old part or confirm against the VIN.
The Impala Limited complication
Chevrolet sold the outgoing W-body Impala to fleet buyers as the Impala Limited from 2014 through 2016, even as retail customers bought the redesigned car. Those Limited cars use the older 513179 and 512357 numbers documented on the 2006-2013 Impala page.
The two Impalas share a model year but not a single part number. The 2000-2005 Impala sits further back on its own separate platform and numbers entirely.
Diagnosing a 2014-2020 Impala wheel bearing
- Jack up the wheel and check for play. Grip the tire at 12 and 6 o’clock with the wheel off the ground, front or rear. See how to check a wheel bearing for the full method.
- Listen for a hum that shifts in turns. A worn bearing growls and changes pitch when weight shifts to one side, detailed on wheel bearing noise in turns.
- Rule out the tires first. Cupped or unevenly worn tires can sound like a bad bearing at highway speed, a distinction covered on tire noise or wheel bearing.
- Watch for an ABS light alongside the noise. A failing hub can trip a wheel speed sensor fault, explained on bad bearing and the ABS light.
- Confirm the body before ordering. A 2014 Chevy Impala wheel bearing order needs to know whether the car is the redesigned model or a fleet Impala Limited before the right number gets picked.
Common questions
What wheel bearing does a 2014 Chevy Impala use?
A 2014 Chevy Impala wheel bearing is 513288, the same part at the front and the rear. That number holds unless the car is a fleet Impala Limited, which uses 513179 front and 512357 rear instead.
What wheel bearing does a 2018 Impala use?
A 2018 Impala uses 513282, again shared between the front and rear corners. This number replaced 513288 starting with the 2018 model year.
Is the Impala Limited the same car as the regular Impala?
No. The Impala Limited is the previous generation body, sold to fleet buyers from 2014 through 2016 while the redesigned Impala sold at retail. The two use different wheel bearing numbers despite sharing a model year.
What wheel bearing does a 2019 or 2020 Impala use?
The catalogs do not document 2019 or 2020 separately. 513282 is the closest reference, but the actual order should match the number on the old part or be confirmed against the VIN.
Does the front and rear wheel bearing differ on this generation?
No, and this is one of the simpler Impala generations. 513288 covers front and rear together through 2017. 513282 takes over for 2018 and stands as the reference for the last two years.