Home › Vehicles › Dodge and Ram › Dodge Charger › 2006-2010 Dodge Charger Wheel Bearing Part Numbers
The short version
- 2006-2010 Dodge Charger wheel bearing coverage runs 513224 up front through 2009, with 2010 undocumented. The 2006 Dodge Charger wheel bearing front number is 513224.
- The rear splits by brake package in 2009: 512301 with performance brakes and a 27 spline shaft, 512369 without.
- 2006 to 2008 rear is 512301 across the board; 2010 rear moves to 512369.
- Count the splines, or match the old part, for the 2009 rear.
The 2006-2010 Dodge Charger keeps one front number, 513224, through 2009. That is the answer to the 2006 Dodge Charger wheel bearing front question for most of this run. The rear changes twice, once in 2009 and again in 2010.
Charger wheel bearing numbers at a glance
513224 is the front hub from 2006 through 2009. That covers the 2006 Dodge Charger wheel bearing front question and every year up to 2009.
The rear starts at 512301 for 2006 through most of 2009, splits by brake package in 2009 itself, then settles on 512369 from 2010 on.
Dodge Charger wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2006 to 2009 | Front | 513224 check price |
| 2010 | Front | not documented |
| 2006 to 2008 | Rear | 512301 check price |
| 2009 | Rear, performance brakes, 27 spline shaft | 512301 check price |
| 2009 | Rear, except performance brakes, 32 spline shaft | 512369 check price |
| 2010 | Rear | 512369 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2006-2010 Dodge Charger: 2006, 2007, 2008, 2009, 2010. Other years live on the main Charger wheel bearing page.
2009 rears split by brake package and spline count, not by trim name. Performance brake cars keep the 27 spline shaft and 512301; other cars move to the 32 spline shaft and 512369.
Count the splines, or match the old part, before ordering a 2009 rear. The 2010 front is an honest gap in the catalogs we hold.
Year by year
2006 through 2008 are simple. 513224 covers the front the same way it does for the 2006 Dodge Charger wheel bearing question. The rear is 512301, with no splits yet.
2009 splits the rear only. Performance brake cars with a 27 spline shaft stay on 512301; everyone else moves to 512369 with a 32 spline shaft.
2010 changes both ends. The rear settles on 512369 for good, but the front is not documented, so match the old part or run the VIN.
How this Charger compares to the next body
The 2011-2019 Charger is a different body with its own front hub choices. Nothing from that page carries backward onto this one.
The 512369 rear introduced in 2010 does continue forward into that next body’s early years. Still, always confirm the number against this car’s own rows first.
Diagnosing a Dodge Charger wheel bearing
- Listen for the noise. A failing bearing usually hums or grinds, growing louder with speed. This guide to wheel bearing noise on turns explains how the sound shifts side to side.
- Rule out the tires. Uneven tire wear can mimic a bearing noise closely. This comparison separates the two.
- Check for play at the wheel. With the wheel off the ground, rock it top and bottom to feel for looseness. This walkthrough covers the process.
- Count the rear shaft splines on a 2009 car. A 27 spline shaft with performance brakes points to 512301; a 32 spline shaft points to 512369.
- Match the old part for a 2010 front. Since that year is not documented, read the stamped numbers or run the VIN.
Common questions
What wheel bearing does a 2006 Charger use?
The 2006 Dodge Charger wheel bearing front number is 513224. The rear is 512301, with no splits yet that year.
What wheel bearing does a 2009 Charger use?
The 2009 Charger front is still 513224. The rear splits: 512301 with performance brakes and a 27 spline shaft, 512369 without.
Why isn’t the 2010 Charger front wheel bearing documented?
The catalogs we hold simply stop carrying a front listing after 2009. That is a documentation gap, so match the old part or run the VIN.
How do I know which 2009 Charger rear I need?
Count the splines on the old shaft. A 27 spline shaft with performance brakes takes 512301; a 32 spline shaft takes 512369.
Does the 2010 Charger rear carry into the next generation?
Yes, 512369 continues into the early years of the 2011-2019 Charger. Still confirm the number against this car’s own rows before ordering.