Home › Vehicles › Hyundai › Elantra › 2007-2010 Hyundai Elantra Wheel Bearing Part Numbers

The short version

  • A 2008 Hyundai Elantra wheel bearing order needs front bearing 510093. The rear splits by ABS, 512340 with it or 512410 without.
  • Front documentation stops at 2009. A 2010 Elantra front bearing is a match old part or VIN job.
  • The rear runs the full 2007-2010 span, with the non-ABS hub, 512410, starting in 2008.
  • 2007 cars use 512340 at the rear regardless of ABS equipment.

The 2007-2010 Hyundai Elantra splits its documentation unevenly between front and rear. A 2008 Hyundai Elantra wheel bearing order sits right where both ends are still fully documented.

Hyundai Elantra wheel bearing numbers at a glance

2008 Hyundai Elantra wheel bearing numbers

Front is a press-in ball bearing, number 510093, for 2007 through 2009.

Rear hub is 512340 with ABS or 512410 without it, from 2008 on.

2007-2010 Hyundai Elantra wheel bearing part numbers

2007-2010 Hyundai Elantra wheel bearing part numbers
Years Detail Number
2010 Front, press-in ball match old part or VIN
2007-2009 Front, press-in ball 510093 check price
2008-2010 Rear hub, without ABS 512410 check price
2007-2010 Rear hub, ABS 512340 check price

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Lookups run through the cross reference page.

This page covers the 2007-2010 Hyundai Elantra: 2007, 2008, 2009, 2010. Other years live on the main Hyundai Elantra wheel bearing page.

The front and rear documentation do not end at the same year. The front stops after 2009, while the rear runs through 2010.

A 2010 Elantra needs the front matched to the old part or VIN. The rear still has a documented number.

Year by year

2007 cars use 512340 at the rear no matter the ABS equipment, alongside front number 510093.

2008 and 2009 split the rear by ABS, 512340 with it or 512410 without. The front stays on 510093. A 2008 Hyundai Elantra wheel bearing order needs that ABS check at the rear.

2010 keeps the same rear split. The front moves to a match old part or VIN job, since the catalogs stop documenting it.

Why the rear outlasts the front here

The rear hub carries the ABS sensor built in on equipped cars, which is what the 512340 versus 512410 split reflects. How that sensor sits in the hub is covered on hub assembly and ABS sensor.

The front stays a press-in ball design through 2009, the same style used on the 2001-2006 Elantra. It just runs out of documented years first.

Diagnosing a 2007-2010 Hyundai Elantra wheel bearing

  1. Jack up the wheel and check for play. Grip the tire at 12 and 6 o’clock with the wheel off the ground. See how to check a wheel bearing for the method.
  2. Listen for a hum that shifts in turns. A worn bearing usually grows louder leaning one direction, detailed at wheel bearing noise in turns.
  3. Rule out the tires before condemning the bearing. Uneven tread can mimic bearing noise at highway speed on a car this age.
  4. Check for an ABS warning light on rear noise. A failing rear hub can trip a wheel speed fault, more at bad bearing and the ABS light.
  5. Match the old front bearing on a 2010 car. With no documented 2010 front number, the physical part or the VIN settles the order.

Common questions

What wheel bearing does a 2008 Hyundai Elantra use?

A 2008 Hyundai Elantra wheel bearing order needs front bearing 510093. The rear splits by ABS, 512340 with it or 512410 without.

What wheel bearing does a 2010 Hyundai Elantra use?

A 2010 Elantra keeps the rear split, 512340 with ABS or 512410 without. The front is not documented for 2010, so match the old part or VIN.

Why does a 2007 Hyundai Elantra only need one rear number?

The 2007 rows list 512340 without an ABS qualifier, so it covers every 2007 car at the rear. The ABS split arrives starting in 2008.

Is the Hyundai Elantra front bearing press-in on this generation?

Yes, for 2007 through 2009. It is a press-in ball design, number 510093, documented only through those three years.

Does the rear wheel bearing on this Elantra need an ABS check every year?

From 2008 on, yes. 2007 is the only year where one number covers both ABS and non-ABS cars.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.