Home › Vehicles › Infiniti › Infiniti I30 and I35 Wheel Bearing Part Numbers › 2000-2004 Infiniti I30 Wheel Bearing Part Numbers
The short version
- The 2001 Infiniti I30 wheel bearing range runs 2000 through 2004 and spans a badge change with no number change.
- Front: two parallel listings exist, hub assembly HA590600K or ball bearing alternate 510060.
- Rear: one hub, 512203, for every year in the range.
- 2000-2001 cars were badged I30 and 2002-2004 cars were badged I35, same rows both ways.
One nameplate change sits in the middle of this range. I30 runs through 2001, then I35 takes over from 2002, with the same bearing numbers either side of it.
I30 and I35 wheel bearing numbers at a glance
The front carries two listings, a hub assembly under HA590600K or a ball bearing alternate under 510060.
The rear is 512203 for the whole 2000-2004 run, regardless of badge.
Infiniti I30 wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2000 to 2004 | Front hub assembly, I30 2000-01, I35 2002-04 | HA590600K check price |
| 2000 to 2004 | Front bearing, ball alternate | 510060 check price |
| 2000 to 2004 | Rear hub | 512203 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2000-2004 Infiniti I30 and I35: 2000, 2001, 2002, 2003, 2004. Other years live on the main Infiniti I30 wheel bearing page.
The front has two parallel listings. HA590600K is a complete hub assembly and 510060 is a ball bearing alternate. Match the number the old part carries rather than picking either one.
The badge change from I30 to I35 in 2002 does not change any of the three numbers on this page.
Year by year
2000 and 2001 cars wear the I30 badge. 2002 through 2004 cars wear the I35 badge instead. Every one of these 2001 Infiniti I30 wheel bearing rows carries straight across both badges without a number change.
Reading the two front listings
This 2001 Infiniti I30 wheel bearing question always comes back to the front. The catalogs carry both a hub assembly and a ball bearing design for the same range of years. That is a parallel listing, not a choice between two working options, so the part already on the car decides which one to buy.
Pulling the old part and reading its casting settles it before the order goes in.
Diagnosing an Infiniti I30 wheel bearing
- Listen for a hum that builds with speed. That pattern points to a bearing rather than uneven tire wear.
- Rock the wheel at 12 and 6 o’clock. Looseness at the front hub or the rear hub identifies which corner is failing.
- Pull the old front part before ordering. Compare it against both HA590600K and 510060 rather than guessing.
- Check for ABS or brake warnings. See bad bearing and the ABS light for how a bearing fault can show up.
- Confirm badge and year together. I30 or I35, the front and rear numbers stay the same.
Common questions
What wheel bearing does a 2001 Infiniti I30 use?
A 2001 Infiniti I30 wheel bearing order uses either HA590600K or 510060 up front, matched to the old part. The rear takes 512203.
What wheel bearing does a 2004 Infiniti I35 use?
The 2004 I35 uses the same numbers as the 2001 I30: HA590600K or 510060 front, matched to the old part, and 512203 rear.
Are HA590600K and 510060 interchangeable front options?
No. They are parallel listings for the same position, and the correct one matches whatever design is already on the car.
Is the I30 the same car as the I35?
For this bearing question, yes. The badge changed in 2002 but the front and rear numbers did not.
Does the rear wheel bearing change between I30 and I35?
No. 512203 covers the rear for the full 2000-2004 range under both badges.