Home › Vehicles › Isuzu › Isuzu Rodeo Wheel Bearing Part Numbers

The short version

  • The Isuzu Rodeo wheel bearing setup flips in 2002. Serviceable bearings give way to a bolt-on hub on both 2WD and 4WD trucks.
  • Through 2001, front hardware matches the Trooper. The numbers are inner seal 710168, inner bearing 32009-XA, and outer bearing A-140.
  • From 2002 on, the front is a hub unit. 513165 covers 2WD, 513166 covers 4WD, just one digit apart.
  • The Honda Passport is the same truck under a different badge, built 1994 through 2002. Its own catalog lists separate Timken part numbers.

Isuzu built the Rodeo on the same underpinnings it sold to Honda as the Passport. Both trucks share a clean split: serviceable bearings for a decade, then a bolt-on hub in 2002.

Rodeo wheel bearing numbers at a glance

513165 front hub, 2WD; 513166 front hub, 4WD (2002-2004)

These hub numbers cover the Isuzu Rodeo wheel bearing setup from 2002 through 2004. That includes the Axiom-badged trucks built alongside it.

Earlier trucks, 1991 through 2001, use a serviceable tapered set instead. The numbers are inner seal 710168, inner bearing 32009-XA, and outer bearing A-140.

Isuzu Rodeo wheel bearing part numbers

Isuzu Rodeo (1991-2004) front wheel bearing parts
Years Detail Number
2002-2004 Front hub, 2WD (with Axiom) 513165 check price
2002-2004 Front hub, 4WD (with Axiom) 513166 check price
1991-2001 Front, inner seal, 2WD and 4WD 710168 check price
1991-2001 Front, inner bearing, 2WD and 4WD 32009-XA check price
1991-2001 Front, outer bearing, 2WD and 4WD A-140 check price

Every model year this chart resolves: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and 2004.

Isuzu Rodeo pages by year range

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Lookups run through the cross reference page.

2002 changes everything, and one digit changes it twice.

2002 is the flip year for the Isuzu Rodeo wheel bearing setup. It moves from a serviceable tapered set to a bolt-on hub. Buying the wrong side of that line is the most common mistake on this truck.

Once in hub territory, the 2WD number, 513165, and the 4WD number, 513166, differ by a single digit. Confirm drivetrain before ordering, not just model year.

The same truck, a different badge, a different catalog

Honda sold this same truck as the Honda Passport from 1994 through 2002. It is the identical vehicle underneath, but Honda’s own listings use Timken’s NP-series numbers instead.

That means the same hardware sits under two different catalog systems, depending on the badge. Browse the full lineup on the Isuzu hub page.

The Rodeo Sport held on longer

The Rodeo Sport series, sold 1999 through 2003, kept the older serviceable front end through 2003. That is a year after the standard Rodeo switched to a bolt-on hub in 2002.

A 2002 or 2003 Rodeo Sport actually needs the 710168, 32009-XA, and A-140 set above. That is not the newer hub number.

The rear axle has no clean catalog row on any Rodeo. Match the old part or confirm by VIN.

The closely related Isuzu Trooper never made this hub switch at all.

Diagnosing an Isuzu Rodeo wheel bearing

  1. Confirm the model year and drivetrain first. An Isuzu Rodeo wheel bearing diagnosis starts with the drivetrain and whether the truck is pre or post 2002.
  2. Listen for noise that changes in a turn. A bad bearing typically gets louder turning away from the worn side and quieter turning toward it.
  3. Jack up the corner and check for play. Rock the tire at 12 and 6 o’clock, following this check procedure, on either generation.
  4. On a pre-2002 truck, inspect the grease. Since that front end is serviceable, pull the hub cap and check for contamination before a full repack.
  5. On a 2002-or-later truck, check the ABS sensor too. A failing sensor can trigger a bad bearing ABS light even when the noise alone is inconclusive.

Common questions

What is the front Isuzu Rodeo wheel bearing part number?

It depends on the model year. Trucks from 1991 through 2001 use inner seal 710168, inner bearing 32009-XA, and outer bearing A-140. 2002 and later trucks use a hub instead, 513165 for 2WD or 513166 for 4WD.

Is the Honda Passport the same as the Isuzu Rodeo?

It is the same truck built from 1994 through 2002, just badged differently. The Passport’s own catalog uses separate Timken NP-series numbers for the same hardware.

Why do the 2WD and 4WD hub numbers look so similar?

513165 and 513166 differ by a single digit, which makes them easy to transpose. Always confirm 2WD or 4WD before ordering.

Does the Rodeo Sport follow the same 2002 switch?

No. The Rodeo Sport kept the older serviceable front end through 2003, a year longer than the standard Rodeo.

What is the rear Isuzu Rodeo wheel bearing part number?

The catalogs do not list a clean rear row for the Rodeo. Match the old part or confirm the number by VIN.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.