Home › Vehicles › Jeep › Grand Cherokee › 2011-2019 Jeep Grand Cherokee Wheel Bearing Part Numbers
The short version
- 2015 Jeep Grand Cherokee wheel bearing part numbers for the 2011-2019 run: front hub 513324 (2011-2018), rear hub 512513 for 4WD or 512514 for 2WD (2014-2019).
- 2011-2013 rear hubs are not documented on this generation. Match the old part or the VIN.
- 2019 front hubs are not documented either, so match the old part there too.
- From 2014 on, the rear number depends entirely on drivetrain: 512513 for 4WD, 512514 for 2WD.
Order a 2015 Jeep Grand Cherokee wheel bearing and the front and rear tell different stories. The 2011-2019 span runs one front hub for eight years, then adds a rear hub that only starts showing up in the catalogs from 2014.
The core numbers
513324 is the front hub for 2011 through 2018. It is a single number regardless of drivetrain.
The rear only gets documented from 2014 on, and it splits by drivetrain: 512513 for 4WD, 512514 for 2WD.
Jeep Grand Cherokee wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2019 | Front hub | Match old part or VIN |
| 2014-2019 | Rear hub, 4WD | 512513 check price |
| 2014-2019 | Rear hub, 2WD | 512514 check price |
| 2011-2018 | Front hub | 513324 check price |
| 2011-2013 | Rear hub | Match old part or VIN |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2011-2019 Jeep Grand Cherokee: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019. Other years live on the main Jeep Grand Cherokee wheel bearing page.
The three-year gap. The rear rows do not start until 2014, three years after the front hub’s documentation begins. A 2011, 2012 or 2013 rear order is a match job: pull the old part or read the VIN, then order by drivetrain once the split arrives in 2014.
Year by year
2011 through 2013 Grand Cherokees use the 513324 front hub, and that part is settled. The rear has no documented number for these three years, so match the old part or confirm by VIN.
2014 through 2018 is the fully documented stretch. Front stays on 513324, and the rear splits by drivetrain: 512513 for 4WD, 512514 for 2WD.
2019 flips the pattern. The rear is still documented and still split by drivetrain, but the front hub loses its number here, so match the old part on that end.
Where this generation sits
The 2011-2019 Grand Cherokee follows the 2005-2010 Grand Cherokee, which was the first generation to document a bolt-on rear hub instead of sending owners to axle-tag territory. This generation keeps that bolt-on rear and adds the drivetrain split once 2014 arrives.
Earlier Grand Cherokees, back through the 1999-2004 Grand Cherokee, handled the rear differently. Knowing which generation is under the truck matters before any rear order goes in.
Diagnosing a Jeep Grand Cherokee wheel bearing
- Listen for the pitch. A worn wheel bearing usually growls or hums, and the sound rises with speed. Noise that changes in a turn often points at one side more than the other.
- Check for play. With the wheel off the ground, grab it at 12 and 6 o’clock and rock it. Looseness there is a bearing complaint, not a suspension one.
- Watch the ABS light. A failing hub can damage the sensor ring inside it, and that shows up as an ABS warning before the noise gets bad.
- Rule out the tire. Cupped tires and bearing hum sound alike at highway speed, so a look at tread wear helps before parts get ordered.
- Confirm drivetrain and side. A 2015 Jeep Grand Cherokee wheel bearing job depends on knowing 4WD versus 2WD before the rear number gets called in.
Common questions
What wheel bearing does a 2015 Jeep Grand Cherokee use?
A 2015 Jeep Grand Cherokee wheel bearing order splits by drivetrain at the rear: 512513 for 4WD or 512514 for 2WD. The front hub is 513324.
What wheel bearing does a 2012 Jeep Grand Cherokee use?
The front hub is still 513324. The rear is not documented for 2012, so match the old part or confirm by VIN.
Does the front hub change across the whole 2011-2019 run?
No. 513324 covers 2011 through 2018. Only 2019 drops out of the documented front hub list.
How do I know if my Grand Cherokee is 4WD or 2WD for the rear order?
Check the build sheet, the transfer case, or confirm with the VIN decode. The rear hub numbers only apply from 2014 on, and they are drivetrain specific.
What if my 2019 Grand Cherokee needs a front hub?
The catalogs do not document a 2019 front number. Match the number on the old hub, or confirm the part through the VIN.