Home › Vehicles › Kia › Kia Borrego Wheel Bearing Part Numbers › 2009-2011 Kia Borrego Wheel Bearing Part Numbers
The short version
- A 2009 Kia Borrego front wheel bearing replacement is HA590329 on RWD or HA590327 on 4WD.
- The 2009 rear is HA590328 on RWD, ball bearing style, and HA590327 on 4WD.
- 2010 and 2011 Borregos have no documented listing; match the old part or run the VIN.
- The Borrego sold through 2011, but the catalogs only cover the 2009 model year.
Kia sold the Borrego from 2009 through 2011. Only the first year shows up in the catalogs with real numbers. A 2009 Kia Borrego front wheel bearing replacement splits by drivetrain, RWD or 4WD.
Kia Borrego wheel bearing numbers at a glance
A 2009 Kia Borrego front wheel bearing replacement is HA590329 on RWD or HA590327 on 4WD.
The 2009 rear is HA590328 on RWD, a ball bearing design. The 4WD rear reuses HA590327, the same number as the 4WD front.
Kia Borrego wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2009 | Front, RWD | HA590329 check price |
| 2009 | Front, 4WD | HA590327 check price |
| 2009 | Rear, RWD, ball bearing | HA590328 check price |
| 2009 | Rear, 4WD | HA590327 check price |
| 2010 to 2011 | Front and rear | not documented, match old part or VIN |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2009-2011 Kia Borrego: 2009, 2010, 2011. Other years live on the main Kia Borrego wheel bearing page.
On the 4WD Borrego, HA590327 serves both front and rear. A 2009 Kia Borrego front wheel bearing replacement and a rear replacement can call for the same box.
The catalogs we hold stop short after 2009. On a 2010 or 2011 truck, match the number the old part carries or run the VIN.
Year by year
2009 is the only fully documented year. It splits four ways: front RWD, front 4WD, rear RWD, and rear 4WD.
A 2009 Kia Borrego front wheel bearing replacement always starts with the drivetrain.
2010 and 2011 carry no listing at either end. The old part or the VIN decides the number on those trucks.
One truck, a short paper trail
The Borrego stayed in Kia’s lineup for three model years. The catalogs only wrote down numbers for the first one.
That leaves two full model years where the shop works backward from the part already on the truck.
Any later documentation would get added to this same table rather than a separate page.
Diagnosing a Kia Borrego wheel bearing
- Listen for the noise. A worn bearing usually growls or hums, and the pitch changes with speed, not RPM. Wheel bearing noise on turns covers how that sounds.
- Rule out the tires. Uneven wear can mimic a bearing growl on a truck this size. Tire noise or wheel bearing separates the two.
- Check for play. With the wheel off the ground, rock it top and bottom to feel for looseness. How to check a wheel bearing covers the steps.
- Confirm the drivetrain. RWD and 4WD Borregos take different front numbers, and the 4WD truck shares one number front and rear.
- Match the old part on 2010 and later. With no documented listing past 2009, pull the old bearing’s markings or run the VIN.
Common questions
What wheel bearing does a 2009 Kia Borrego use?
A 2009 Kia Borrego uses HA590329 up front on RWD or HA590327 on 4WD, plus HA590328 at the rear on RWD or HA590327 on 4WD.
What wheel bearing does a 2010 Kia Borrego use?
A 2010 Kia Borrego has no documented number at either end. Match the old part or run the VIN rather than guessing from 2009.
Why does the 4WD Borrego use one number for both ends?
The catalogs list HA590327 for the 4WD front and the 4WD rear alike. That single number covers a 2009 Kia Borrego front wheel bearing replacement and the rear job.
Does the RWD Borrego share numbers front to rear?
No. RWD trucks use HA590329 up front and HA590328 at the rear, two separate numbers.
Why does documentation stop after 2009?
The Borrego sold through 2011, but the catalogs we hold only carry numbers for 2009. Later trucks match the old part or the VIN.