Home › Vehicles › Nissan › Nissan Sentra › 2000-2006 Nissan Sentra Wheel Bearing Part Numbers
The short version
- The 2005 Nissan Sentra wheel bearing up front is 510061, a press in ball listed by both National and Timken.
- That same front number covers every year here, 2000 through 2006.
- The rear hub splits by ABS: HA590110 with ABS, 512303 without ABS on CA, XE, GXE, and S trims.
- Those two rear numbers come from different catalogs, so match what the old hub carries.
Nissan Sentra sedans from 2000 through 2006 use one front bearing the whole run. The rear hub is where it gets particular. ABS status decides the rear number, and each option comes from a different catalog.
The core numbers for this generation
The 2005 Nissan Sentra wheel bearing up front is 510061, a press in ball. National and Timken both list it under this one number.
The rear hub is HA590110 with ABS, or 512303 without ABS on base trims. These come from different catalogs, so match the old hub.
Nissan Sentra wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2000 to 2006 | Rear hub, with ABS | HA590110 check price |
| 2000 to 2006 | Rear hub, without ABS, CA, XE, GXE, and S trims | 512303 check price |
| 2000 to 2006 | Front, press in ball | 510061 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2000-2006 Nissan Sentra: 2000, 2001, 2002, 2003, 2004, 2005, 2006. Other years live on the main Nissan Sentra wheel bearing page.
The rear hub splits by ABS, not by year or trim alone. HA590110 and 512303 come from two different catalogs for the same position.
Match what the old hub carries rather than guessing off the trim badge, since ABS was not standard across every trim here.
Year by year
There is one hardware story from 2000 through 2006. The 2005 Nissan Sentra wheel bearing numbers match every other year here, front and rear alike. The rear hub stays HA590110 with ABS or 512303 without it, the same split the whole span.
2007 starts a different setup entirely on the sibling page.
Where this generation sits in the Sentra line
The 1995-1999 Sentra used its own front ball bearing and a single rear hub with no ABS split. The 2007-2012 Sentra moves to its own listings again, closing out both of these numbers.
The ABS based rear split here shows up the same way it does on many cars, where a bad bearing can trip an ABS warning light before any noise appears.
Diagnosing a Nissan Sentra wheel bearing
- Check for ABS first. The rear hub number depends on it, HA590110 with ABS or 512303 without.
- Listen for a front hum. A worn press in ball bearing drones at speed and can shift pitch in a turn.
- Rock the wheel at 12 and 6. Play at either end points to the bearing, not a bushing or CV joint.
- Watch the ABS light. A failing rear hub can trip a fault at the hub mounted ABS sensor before it gets loud.
- Match the old hub before ordering. The two rear numbers come from different catalogs, so switching mid repair can cause confusion.
Common questions
What wheel bearing does a 2005 Nissan Sentra use up front?
The 2005 Nissan Sentra wheel bearing up front is 510061, a press in ball listed by both National and Timken. It covers every year from 2000 through 2006.
What wheel bearing does a 2005 Nissan Sentra use at the rear?
It depends on ABS. A 2005 Sentra with ABS uses HA590110, and one without ABS on a base trim uses 512303 instead.
Why do two different rear hub numbers exist for the same Sentra?
ABS status decides the rear hub, and each option comes from a different catalog. Match what the old hub carries rather than treating them as interchangeable.
Is the Sentra front wheel bearing the same on every trim?
Yes. 510061 covers every trim and every year from 2000 through 2006, ABS or not.
Does the 2007 Sentra share this rear hub?
No. 2007 begins a different setup on its own page, and none of the 2005 Nissan Sentra wheel bearing numbers carry forward to it.