Home › Vehicles › Pontiac › Pontiac Montana Wheel Bearing Part Numbers › 2005-2009 Pontiac Montana SV6 Wheel Bearing Part Numbers
The short version
- A 2006 Pontiac Montana SV6 wheel bearing order runs on one front number, 513236, for 2006 through 2009, with a different pair of listings in the launch year.
- The 2005 front hub carries two parallel catalog listings, Moog 513199 and National 513179. Match the number the old part carries.
- From 2006 to 2009, the rear splits by flange shape: a 3 hole triangular flange takes 512308 or 513197, a 4 hole rectangular flange takes 512309.
- The 2005 rear hub is not documented. Match the old part or run the VIN.
Pontiac replaced the classic Montana van with the Montana SV6 starting in 2005. This page covers that SV6 body through 2009.
2006 Pontiac Montana SV6 wheel bearing numbers at a glance
One front number, 513236, covers 2006 through 2009, including all wheel drive vans in 2006.
The rear hub depends on the flange bolted to the axle, not the model year.
Pontiac Montana SV6 wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2006 to 2009 | Front hub, SV6 (2006 also AWD) | 513236 check price |
| 2005 | Front hub, SV6 (Moog) | 513199 check price |
| 2005 | Front hub, SV6 (National alt row) | 513179 check price |
| 2006 to 2009 | Rear hub, SV6, 3 hole triangular flange | 512308 check price |
| 2006 to 2009 | Rear hub, SV6, 3 hole flange, alt number | 513197 check price |
| 2006 to 2009 | Rear hub, SV6, 4 hole rectangular flange | 512309 check price |
| 2005 | Rear hub | not documented, match old part or VIN |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2005-2009 Pontiac Montana SV6: 2005, 2006, 2007, 2008, 2009. Other years live on the main Montana wheel bearing page.
The 2005 front hub carries parallel listings from two catalog brands, Moog 513199 and National 513179. Do not treat these as either working. Match the number the old part carries.
The rear splits by flange shape from 2006 on. Count the mounting holes and look at the flange outline before ordering, since the year alone will not tell you.
The 2005 rear hub is not documented at all. Match the old part or run the VIN.
Year by year
2005 stands alone: the front carries the parallel Moog and National listings, and the rear is not documented.
2006 adds all wheel drive under the same front number, 513236, and the rear listings by flange shape begin.
2007 through 2009 hold steady on 513236 up front and the same flange based rear split. A 2006 Pontiac Montana SV6 wheel bearing check sits right in the middle of that stable stretch.
Split from the classic Montana van
This SV6 body is a different van from the 1999-2005 Montana on the earlier Montana page. Its numbers do not carry across.
Treat the two vans as separate parts catalogs even though they share the Montana name.
A 2006 Pontiac Montana SV6 wheel bearing order should use this page’s rows only.
Diagnosing a Pontiac Montana SV6 wheel bearing
- Identify the model year first. A 2005 van needs the parallel front listings checked against the old part. 2006 and later use one front number.
- Count the rear flange holes. Three holes in a triangular pattern point to 512308 or 513197. Four holes in a rectangle point to 512309.
- Confirm the drivetrain on 2006 vans. All wheel drive shares the same front number as front wheel drive that year. See how drive type affects wheel bearings.
- Check for noise and play. Raise the wheel, rock it at 12 and 6 o’clock, and spin it slowly. See how to check a wheel bearing for the full routine.
- Rule out the ABS sensor. A bearing issue can trip a dash light before it gets loud. See bad bearing and the ABS light for that pattern.
Common questions
What wheel bearing does a 2006 Pontiac Montana SV6 use?
A 2006 Pontiac Montana SV6 wheel bearing order needs 513236 up front. At the rear, check the flange shape for 512308, 513197, or 512309.
What wheel bearing does a 2005 Pontiac Montana SV6 use?
A 2005 Pontiac Montana SV6 uses either Moog 513199 or National 513179 up front. Match whichever number the old part carries. The rear is not documented that year.
Why does the 2005 front hub have two different part numbers?
Two catalog brands list different numbers for the same 2005 position. These are parallel listings, so match the number the old part carries rather than picking either one.
How do I tell the two rear flange types apart?
Count the bolt holes on the flange. A three hole triangular flange takes 512308 or its alt row 513197. A four hole rectangular flange takes 512309 instead.
Does this SV6 share numbers with the older Montana van?
No. The 1999-2005 Montana is a different body with its own page and its own numbers, even though both vans carry the Montana name.