Home › Vehicles › Suzuki › Suzuki SX4 › 2007-2013 Suzuki SX4 Wheel Bearing Part Numbers
The short version
- The 2008 Suzuki SX4 wheel bearing range runs 2007 through 2013, and the front listing ends years before the rear does.
- Front: press in bearing 510077 covers 2007 through 2009 only. 2010-2013 fronts are not documented.
- Rear: 512486 for front wheel drive from 2008, or 512393 for all wheel drive across the whole run.
- A 2010-2013 front means matching the old part or running the VIN, not borrowing 510077 forward.
The front and rear listings on this SX4 do not run on the same clock. That gap starts in 2010.
SX4 wheel bearing numbers at a glance
510077 is a press in front bearing documented for 2007 through 2009. Nothing later is documented under this name.
The rear runs the whole span: 512486 for front wheel drive from 2008 on, 512393 for all wheel drive from 2007 on.
Suzuki SX4 wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2010 to 2013 | Front | not documented, match old part or VIN |
| 2007 to 2009 | Front, press in | 510077 check price |
| 2008 to 2013 | Rear, front wheel drive | 512486 check price |
| 2007 to 2013 | Rear, all wheel drive | 512393 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2007-2013 Suzuki SX4: 2007, 2008, 2009, 2010, 2011, 2012, 2013. Other years live on the main Suzuki SX4 wheel bearing page.
The front listing stops at 2009. A 2010-2013 SX4 front is not documented under 510077 or any other number. Match the number the old part carries or run the VIN, and do not borrow the earlier press in listing forward.
Drivetrain decides the rear. The front wheel drive rear listing itself only starts in 2008, one year after the range begins.
Year by year
This 2008 Suzuki SX4 wheel bearing table starts in 2007 with the front press in bearing 510077 and the all wheel drive rear 512393 only, since the FWD rear has not started yet. 2008 and 2009 carry all four rows together. From 2010 through 2013 the front drops out of documentation entirely, leaving only the two rear rows by drivetrain.
Why the front documentation stops
This 2008 Suzuki SX4 wheel bearing range sits inside a wider run where the catalogs never picked up a front listing past 2009. Later SX4 fronts fall to old part matching or a VIN based lookup instead.
The rear side is more complete, but it still depends on drivetrain. Confirming front or all wheel drive comes first.
Diagnosing a Suzuki SX4 wheel bearing
- Check the model year against the front table. 2007-2009 fronts use 510077; 2010-2013 fronts need the old part or the VIN.
- Confirm the drivetrain for the rear. Front wheel drive uses 512486 from 2008 on, all wheel drive uses 512393 for the whole run.
- Listen for a hum that grows with speed. That points to a bearing rather than tire wear.
- Rock the wheel at 12 and 6 o’clock. Play at the hub identifies the failing corner, front or rear.
- Budget for press work on a documented front. Where 510077 applies, see press in wheel bearing service for what that job involves.
Common questions
What wheel bearing does a 2008 Suzuki SX4 use?
A 2008 Suzuki SX4 wheel bearing order needs 510077 up front. Add 512486 or 512393 in the rear by drivetrain.
What wheel bearing does a 2012 Suzuki SX4 use?
The 2012 SX4 front is not documented, so match the old part or the VIN. The rear stays 512486 for front wheel drive or 512393 for all wheel drive.
Why does the SX4 front bearing stop being listed after 2009?
The catalogs simply do not carry a front listing past that year. Later fronts rely on matching the old part or the VIN instead.
Is the SX4 front wheel bearing press in or bolt on?
Press in, where it is documented. 510077 presses into the knuckle for 2007 through 2009 fronts.
Does the SX4 rear wheel bearing depend on drivetrain?
Yes. Front wheel drive rears use 512486 starting in 2008. All wheel drive rears use 512393 across the entire 2007-2013 range.