Home › Vehicles › Toyota › Toyota Sienna › 1998-2003 Toyota Sienna Wheel Bearing Part Numbers
The short version
- 2000 toyota sienna wheel bearing numbers for 1998-2003 are press-in front bearing 510006 and rear hub 512041.
- Both numbers hold for the full six model years, with no splits and no qualifiers to chase.
- The front is a press-in cartridge, not a bolt-on hub. It needs a press or knuckle removal.
- Two catalog listings agree on the rear hub 512041, front to back.
Toyota sold the first Sienna from 1998 through 2003 on a single chassis. The parts list stayed just as settled. One front bearing and one rear hub cover the whole run.
A 2000 toyota sienna wheel bearing order needs only the model year to land on the right part.
2000 Toyota Sienna wheel bearing at a glance
Press-in front bearing, shared with Camry and Avalon of the era.
Rear hub assembly, agreed on by two separate catalog listings.
Toyota Sienna wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 1998-2003 | Rear hub assembly | 512041 check price |
| 1998-2003 | Front, press-in bearing | 510006 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 1998-2003 Toyota Sienna: 1998, 1999, 2000, 2001, 2002, 2003. Other years live on the main Toyota Sienna wheel bearing page.
The front bearing is a press-in cartridge, not a hub a wrench alone will swap. Seating the new bearing straight needs a shop press or a trip to a machine shop. See the press-in wheel bearing page before starting.
The rear side is the easier job, a bolt-on hub assembly with the bearing built in.
Year by year
Every model year from 1998 to 2003 shares the same two numbers. There is no mid-run part change and no trim split. That makes a 2000 toyota sienna wheel bearing order simple to place.
The front bearing carries the same case across Camry and Avalon models of the era. It shows up on parts counters under more than one vehicle listing.
The rear hub also carries a Timken cross number, BR930339, alongside 512041. Both point at the same part, so either number should pull it up in a lookup tool.
How the first-generation Sienna shares its parts
Toyota built the first Sienna on Camry underpinnings. The front bearing reflects that shared design. Part 510006 serves the Sienna, the Camry, and the Avalon of the same years.
The next Sienna body, 2004 through 2010, moved to a different set of numbers. That generation is covered on the 2004-2010 Sienna page. The third body, 2011 through 2018, changed the rear numbers again and split them by drivetrain.
Diagnosing a 2000 Toyota Sienna wheel bearing problem
- Listen at speed. A rear hub failure sounds like a rumble that rises and falls in turns.
- Rock the wheel. Lift the corner and check for play at twelve and six o’clock.
- Separate tire noise from bearing noise. Compare against tire noise versus wheel bearing noise before ordering parts.
- Inspect the knuckle bore. A press-in front job means checking the bore for damage first.
- Check the basics. Rule out a loose lug or worn CV joint with how to check a wheel bearing.
Common questions
What wheel bearing does a 2000 Toyota Sienna use?
The 2000 Toyota Sienna uses front bearing 510006 and rear hub 512041. Every 1998-2003 Sienna uses the same pair.
What wheel bearing does a 2002 Toyota Sienna use?
The 2002 Toyota Sienna uses the same pair as 2000, front bearing 510006 and rear hub 512041.
Is the Sienna front wheel bearing press-in or bolt-on?
Press-in. The front is a cartridge bearing, part 510006. It seats in the knuckle rather than bolting on as a hub.
Does the Sienna share its wheel bearing with other Toyota models?
Yes. Front bearing 510006 also fits the Camry and Avalon of the same years on a shared chassis.
Do all 1998-2003 Sienna years use the same rear hub?
Yes. Rear hub 512041 covers the full 1998-2003 run with no year-to-year split.