Home › Vehicles › Toyota › Tundra › 2000-2006 Toyota Tundra Wheel Bearing Part Numbers
The short version
- A 2006 Tundra wheel bearing job up front is one inner bearing, 517011, with seal 710571. That pair covers the whole 2000-2006 run.
- The front outer bearing carries no catalog number of its own. It comes as a matched set, so it gets ordered by matching the number on the old part.
- The rear rides on the axle shaft, not a hub. That puts it in axle bearing territory, not wheel bearing territory.
- No year split exists anywhere here. Every model year from 2000 through 2006 uses the same inner bearing and seal.
Toyota built the 2000-2006 Tundra around a serviceable front bearing, not a sealed cartridge. One inner bearing and one seal cover the whole run, shared with the Sequoia of the same years. The outer bearing is the exception: it never got its own catalog listing.
The 2000-2006 Tundra’s core numbers
One inner bearing and one seal cover every 2000-2006 Tundra front end, regardless of model year.
The front outer bearing has no catalog number here. The rear also has none. It rides the axle shaft, which makes it axle bearing territory, not a wheel bearing swap.
2000-2006 Toyota Tundra wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2000-2006 | Front inner bearing, serviceable, shared rows with Sequoia | 517011 check price |
| 2000-2006 | Front inner seal | 710571 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2000-2006 Toyota Tundra: 2000, 2001, 2002, 2003, 2004, 2005, 2006. Other years live on the main Toyota Tundra wheel bearing page.
This front end is serviceable, not sealed. Repacking and correct preload both matter once the inner bearing goes back in; see repacking and preload and end play. The catalogs document only the inner bearing and its seal, nothing else up front.
Order the outer bearing by matching the number stamped on the old part, since no listing exists for it. Some catalog rows show seal 710570 instead of 710571 for the same position. That is a parallel listing, so match whichever number the old part actually carries.
Year by year
2000 through 2006 run on the identical inner bearing and seal. Toyota made no documented change to this front end across the whole seven-year span. A 2006 Tundra wheel bearing order looks exactly like a 2000 order at the parts counter.
Where this generation fits in the Tundra’s history
This inner bearing and seal are shared with the Sequoia, which widens where a shop can source them. Toyota redesigned the Tundra for 2007 and moved to a sealed front hub. Those newer numbers live on the 2007-2019 Tundra wheel bearing page and do not fit anything built through 2006.
Diagnosing a 2000-2006 Tundra wheel bearing
- Jack up the front wheel and check for play. Grip the tire at 12 and 6 o’clock with the wheel off the ground. Looseness there points to the bearing itself, and a full check confirms it.
- Listen for a hum that tracks road speed. A worn front bearing growls or hums, and the pitch rises and falls with speed. Noise that shifts in turns often points here too.
- Pull the hub and inspect the grease. Dark, dry, or gritty grease on a serviceable bearing means it is overdue, even before it starts making noise.
- Check the outer bearing while the hub is apart. It has no catalog number of its own, so look it over instead of assuming it matches the inner.
- Confirm before ordering parts. Match the old bearing and seal against the numbers here so the counter order is right the first time.
Common questions
What wheel bearing does a 2006 Tundra use?
A 2006 Tundra wheel bearing job up front means inner bearing 517011 with seal 710571. The outer bearing has no catalog number and gets matched to the old part. The rear is axle bearing territory, not a hub.
What wheel bearing does a 2001 Toyota Tundra use?
The same numbers as any other year in this generation: inner bearing 517011 and seal 710571. Nothing changes across 2000 through 2006.
Does the front outer bearing have its own part number?
No. It comes as a matched set with no separate catalog listing, so it gets ordered by matching the old part.
Is the 2000-2006 Tundra rear a wheel bearing job?
No. The rear uses solid axle shaft bearings, a different repair from the front hub. There is no rear wheel bearing number documented for this generation.
Is the 2000-2006 Tundra front bearing shared with any other Toyota?
Yes. The inner bearing and seal rows are shared with the Sequoia from the same years, according to the catalogs.