Home › Vehicles › Honda › Honda Accord › 2003-2007 Honda Accord Wheel Bearing Part Numbers
The short version
- The 2003-2007 Honda Accord runs one front number the whole generation: 510073. Every 2005 Honda Accord wheel bearing search for the front lands on that part.
- The standard rear hub is 512188 across 2003 to 2007, and it is shared with the Acura TL.
- The 2005-2007 hybrid Accord uses its own rear hub, 512327, separate from the gas-only cars.
- Hardware stayed constant for five years, with the hybrid rear as the only split.
The 2003-2007 Honda Accord is a stable generation for parts. A 2005 Honda Accord wheel bearing job is front 510073 and rear 512188, unless the car is a hybrid, in which case the rear changes.
2005 Honda Accord wheel bearing numbers
A 2005 Honda Accord wheel bearing up front is 510073, a press-in ball bearing used across the whole 2003-2007 run.
The standard rear hub is 512188. Hybrid cars from 2005 onward use 512327 instead.
2003-2007 Honda Accord wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2005-2007 | Rear hub, hybrid | 512327 check price |
| 2003-2007 | Rear hub, standard | 512188 check price |
| 2003-2007 | Front, press-in ball | 510073 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2003-2007 Honda Accord: 2003, 2004, 2005, 2006, 2007. Other years live on the main Accord wheel bearing page.
The standard rear hub on this Accord is the same part Acura used on the TL of the same era. That makes 512188 an easy number to source under either badge.
The hybrid rear, 512327, does not carry over to the TL. Confirm the drivetrain before ordering that one.
Year by year
2003 and 2004 run the standard pair: front 510073, rear 512188. No hybrid trim existed yet.
2005 adds the hybrid Accord, which uses front 510073 like every other car this generation, but rear 512327 instead of 512188. That split holds through 2007.
2006 and 2007 carry the same three numbers as 2005, with the standard rear and hybrid rear both unchanged.
How this generation connects to the Accord line
This generation replaced the split rear brakes of the 1998-2002 cars, covered on the 1998-2002 Accord page, with a single rear hub design. That hub design also carried into the Acura TL of the same era.
The following generation moved to yet another front bearing, detailed on the 2008-2012 Accord page. Checking whether a noise follows the wheel speed, not the engine speed, helps separate a bearing problem from other causes, covered on the turning noise page.
Diagnosing a 2003-2007 Honda Accord wheel bearing
- Jack up the corner and rock the wheel at twelve and six o’clock. Feel for play beyond normal tire flex.
- Spin the wheel by hand and listen for a grinding texture instead of a smooth roll.
- Drive at highway speed and note if the noise changes pitch in a turn, detailed on the checking page.
- Watch the ABS light, since a failing bearing can trip it, explained on the ABS light page.
- Confirm hybrid or gas before ordering the rear, since the hybrid uses its own number.
Common questions
What wheel bearing does a 2005 Honda Accord use?
The front is 510073 on every 2005 Accord. The rear is 512188 on standard gas cars or 512327 on the hybrid.
What wheel bearing does a 2003 Honda Accord use?
The numbers match the 2005 Honda Accord wheel bearing chart: front 510073, rear 512188, and no hybrid split yet in 2003.
Is the Accord rear bearing the same as the Acura TL?
Yes, on the standard, non-hybrid cars. The 512188 rear hub is shared between the two models for this era.
Does the hybrid Accord need a different bearing?
Yes, at the rear only. Hybrid cars from 2005 through 2007 use rear hub 512327 instead of 512188.
Did the front bearing change during this generation?
No. Front number 510073 covers every year and every trim from 2003 through 2007, hybrid included.