Home › Vehicles › Honda › Odyssey › 2005-2010 Honda Odyssey Wheel Bearing Part Numbers
The short version
- 2007 Honda Odyssey wheel bearing searches are among the most common year-specific bearing searches anywhere. The driver is front bearing wear on EX-L and Touring vans of the 2005-2010 generation.
- The front is press-in ball WB000020, documented 2005-2009, with 2010 sharing the same generation.
- The rear is hub 512320 from Moog across 2005-2010, with Timken’s HA590151 as a parallel listing through 2009.
- There is no recall behind the complaints. It is a wear pattern tied to heavier wheels on some trims. The fix is the standard front bearing above.
The Honda Odyssey sold as this generation from 2005 to 2010. It is the Odyssey generation owners search for by a wide margin. This page covers 2007 Honda Odyssey wheel bearing numbers and the full 2005-2010 chart, front and rear.
Odyssey wheel bearing numbers at a glance
The front is press-in ball WB000020, documented for 2005 through 2009.
The rear is hub 512320 from Moog across the full 2005-2010 span. Timken’s HA590151 is a parallel listing through 2009.
Honda Odyssey wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2005-2010 | Rear hub, Moog | 512320 check price |
| 2005-2009 | Rear hub, Timken parallel listing | HA590151 check price |
| 2005-2009 | Front, press-in ball bearing | WB000020 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2005-2010 Honda Odyssey: 2005, 2006, 2007, 2008, 2009, 2010. Other years live on the main Odyssey wheel bearing page.
Moog lists the rear hub as 512320 for the full 2005 to 2010 span. Timken’s parallel listing, HA590151, is documented for 2005 to 2009.
Both describe the same rear hub position across the same catalogs. Match whichever number sits on the old part rather than treating one as more correct.
Why the 2007 Odyssey shows up so often
2007 Honda Odyssey wheel bearing searches outnumber those for any other Odyssey year by a wide margin, thousands of lookups a month.
The reason traces to the EX-L and Touring trims of this generation. Many of these vans left the factory on PAX run flat tires.
PAX tires and wheels are heavier than a standard set. Replacement options for them narrowed over time. A number of these vans kept the original heavy wheels for years.
The added weight at the front corner loads the front bearing harder than a standard tire package. A hum showing up earlier than expected became a known pattern on these trims.
There is no recall tied to this. It is a wear pattern owners of these trims have come to expect. The fix is the standard front bearing above, pressed in with proper tooling.
Year by year
2005 and 2006 run the same numbers as the rest of the generation. That means front WB000020 and rear 512320 or HA590151, without the search volume the later years get.
2007 and 2008 are the peak years for front bearing complaints on EX-L and Touring trims. The part numbers do not change from the rest of the run.
2009 keeps the same documented numbers. 2010 is the same generation but sits past where the catalogs stop for the front, so confirm the front number against the old part.
Where this generation sits
The 1999-2004 Odyssey that came before this one used simpler, cleaner numbers with none of this generation’s parallel listings. That page is the 1999-2004 Odyssey page.
The 2011-2017 Odyssey that followed moved the front to a bolt-on hub, ending the press-in era this generation still uses. That page is the 2011-2017 Odyssey page.
Diagnosing a 2007 Honda Odyssey wheel bearing
- Confirm the trim, since EX-L and Touring vans on PAX tires are most associated with early front wear.
- Rock the wheel at twelve and six with it off the ground to feel for play.
- Listen for a hum that grows with speed, the usual first sign on the front of this generation.
- Check the rear number against the old part rather than guessing between 512320 and HA590151.
- Plan for a press, since the front is a press-in ball bearing, not a bolt-on hub.
General checking steps are on the checking page, and the press-in procedure is on the press-in page.
Common questions
What wheel bearing does a 2007 Honda Odyssey use?
2007 Honda Odyssey wheel bearing part numbers are front press-in ball WB000020 and rear hub 512320 from Moog, with Timken’s HA590151 as a parallel listing.
What wheel bearing does a 2010 Honda Odyssey use?
The rear stays 512320 through 2010. The front sits past where the catalogs stop documenting, at 2009, so confirm it against the old part.
Is there a recall on 2007 Odyssey front bearings?
No. There is no recall tied to this complaint, it is a wear pattern rather than a defect campaign.
Why do EX-L and Touring vans wear bearings faster?
Many of these trims left the factory on PAX run flat tires, which are heavier and load the front bearing harder than a standard tire package.
Do I need a press for the front?
Yes. The front is a press-in ball bearing that requires proper tooling, not a bolt-on hub.