Home › Vehicles › Nissan › Nissan Sentra › 2007-2012 Nissan Sentra Wheel Bearing Part Numbers
The short version
- The 2008 Nissan Sentra wheel bearing numbers cover the 2.0L, 4-wheel ABS cars for the full 2007-2012 run. Front hub 513297, rear hub 512384.
- The SE-R’s 2.5L engine runs its own numbers, front 513298 and rear 512383. The catalogs list those without a clean year span.
- Non-ABS Sentras have no documented wheel bearing number at all in this generation.
- One front and one rear number handle all six years of the volume 2.0L ABS cars with no mid-run changes.
Six years of Nissan Sentra, 2007 through 2012, and the volume 2.0L cars never change their wheel bearing numbers. The 2008 Nissan Sentra wheel bearing chart holds front 513297 and rear 512384 the whole time, as long as the car has 4-wheel ABS. Step into an SE-R or a non-ABS trim, and the table stops applying.
The core numbers
These two numbers cover the 2.0L, 4-wheel ABS Sentra across the entire 2007-2012 run.
The SE-R and non-ABS trims fall outside this pair and need their own numbers or a match to the old part.
Nissan Sentra wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2007-2012 | Front hub, 2.0L, 4-wheel ABS | 513297 check price |
| 2007-2012 | Rear hub, 2.0L, 4-wheel ABS | 512384 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2007-2012 Nissan Sentra: 2007, 2008, 2009, 2010, 2011, 2012. Other years live on the main Nissan Sentra wheel bearing page.
513297 and 512384 are the core of the 2008 Nissan Sentra wheel bearing chart, covering the bulk of 2007-2012 production. The SE-R’s 2.5L engine uses different numbers, front 513298 and rear 512383. Those rows carry no clean year span.
Start an SE-R order from the part already on the car, not this table. Non-ABS Sentras have no documented number either, so match the old part there too.
Year by year
2007 through 2012 sit under one front and one rear number for the 2.0L, 4-wheel ABS Sentra. Nothing splits by year inside that span. That single pair is the whole 2008 Nissan Sentra wheel bearing answer for the volume cars.
The SE-R runs on 513298 front and 512383 rear the whole time too, but the catalogs never pin those to a clean year range. Treat an SE-R order as a match job, not a table lookup.
Non-ABS Sentras never got a documented row in this generation. Match the old part there as well.
One trim covers most of the range
The 2013-2018 Sentra simplifies this further, settling on one front and one rear number for the whole body. No ABS or engine split remains at all.
This 2007-2012 car still carries that split. Confirming engine and ABS before ordering matters more here than it will on the newer generation.
Diagnosing a Nissan Sentra wheel bearing
- Listen for a hum that changes with speed. A worn bearing typically grows louder as the car speeds up rather than with engine RPM.
- Check for a change in a turn. The noise often gets louder leaning one way and quieter the other. See the turning-noise guide.
- Rule out the tires. Uneven tread wear can mimic a bearing growl at highway speed. Compare against the tire noise page.
- Confirm the engine and ABS before ordering. On this Sentra, those two facts decide the number, not the year alone.
- Check for play at the hub. With the wheel off the ground, grip it at 12 and 6 and rock it. Full steps are on the wheel bearing check page.
Common questions
What wheel bearing does a 2008 Nissan Sentra use?
A 2008 Nissan Sentra wheel bearing job uses front hub 513297 and rear hub 512384, as long as the car has the 2.0L engine and 4-wheel ABS. SE-R and non-ABS trims need a different answer.
What wheel bearing does a 2011 Nissan Sentra use?
The same pair, 513297 front and 512384 rear, on the 2.0L cars with 4-wheel ABS. Nothing about 2011 changes that.
Does the Sentra SE-R use the same wheel bearing as the regular Sentra?
No. The SE-R’s 2.5L engine runs on its own numbers, front 513298 and rear 512383. Match the old part rather than relying on a year lookup.
What wheel bearing does a non-ABS Sentra use?
There is no documented number for non-ABS Sentras in this generation. Match the old part on the car.
Why isn’t there one number for the whole 2007-2012 Sentra?
Because engine and ABS split the fitment. The 2.0L, 4-wheel ABS car gets 513297 front and 512384 rear, the SE-R runs its own numbers, and non-ABS cars are not documented at all.