Home › Vehicles › Honda › Honda Accord › 2018-2020 Honda Accord Wheel Bearing Part Numbers
The short version
- The 2018 Honda Accord wheel bearing lineup for 2018 to 2020 documents one clear number. WE60616 is the rear hub assembly on the gas car.
- The front is not documented at all for this generation. It has to be matched off the old part or the VIN.
- The hybrid rear is not documented separately either. It should not be assumed to share the gas number without checking.
- WE60616 is not new to this generation. The catalogs also give it as the rear hub for the 2014 to 2015 Accord with the 2.4L and the 3.5L V6.
Between 2018 and 2020, the Accord’s wheel bearing record covers exactly one position with confidence. WE60616 is the rear hub assembly on the gas car. The front and the hybrid rear are both left for the old part or the VIN to settle.
What the 2018 Honda Accord wheel bearing job needs
One number covers the rear hub on the gas Accord for all three years, with no year splits. The front and the hybrid rear both fall outside what the catalogs list here.
2018 to 2020 Honda Accord wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2018 to 2020 | Rear hub assembly, gas | WE60616 check price |
| 2018 to 2020 | Front | not documented, match old part or VIN |
| 2018 to 2020 | Rear, hybrid | not documented, match old part or VIN |
Lookups run through the cross reference page.
This page covers the 2018 to 2020 Honda Accord: 2018, 2019, 2020. Other years live on the main Accord wheel bearing page.
WE60616 is not a new number for the Accord. The catalogs also give it as the rear hub for the 2014 to 2015 car with the 2.4L and the 3.5L V6. Seeing it on a much older Accord is not a listing error.
The 2018 listing is qualified as gas only. The hybrid rear is not documented separately, so match it off the old part or the VIN rather than assume it shares the gas number. The front is not documented at all for this generation.
Year by year
2018, 2019 and 2020 share one rear listing with no split in this 2018 Honda Accord wheel bearing generation. WE60616 covers the gas car across all three years.
The 2013 to 2016 Accord sat on Moog 512544 at the rear. The 2014 to 2015 hybrid used 512516 instead. That earlier pairing is where the split between gas and hybrid first shows up in the record.
Where the gas and hybrid split first appears
The previous generation is covered on the 2013 to 2017 Accord page. Its record carries Moog 512544 as the rear hub for 2013 to 2016 and 512516 for the 2014 to 2015 hybrid. That hybrid entry has no equivalent for 2018 to 2020, where only the gas rear is documented.
A bad rear bearing can also trip an ABS code, a point covered on the bearing and ABS light guide.
Diagnosing a 2018 Honda Accord wheel bearing
- Confirm gas or hybrid first. Only the gas rear hub is documented for 2018 to 2020. That decides whether there is a catalog number to start from.
- Listen for the noise pattern. A worn bearing hums or grinds and gets louder with speed. Work out which corner it comes from before ordering anything.
- Check for play at the wheel. Jack up the corner and grab the tire at twelve and six. Rock it to feel for looseness at the hub.
- Watch for an ABS light. Hub assemblies commonly carry the ABS sensor ring, so a failing bearing can set a code as well as a noise. See how the hub ties to the ABS sensor.
- Run a full check before ordering the front. With no documented front number, confirm the diagnosis by checking the bearing thoroughly and match the old part.
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Common questions
What wheel bearing does a 2018 Honda Accord use?
A 2018 gas Accord uses WE60616 as the rear hub assembly. The front and the hybrid rear are not documented for that year.
What wheel bearing does a 2020 Honda Accord use?
A 2020 gas Accord uses the identical WE60616 rear hub as 2018 and 2019. The front and hybrid rear remain undocumented for that year as well.
Is WE60616 a new part number?
No. The catalogs also list it as the rear hub for the 2014 to 2015 Accord with the 2.4L and the 3.5L V6. The same number on an older car is expected, not an error.
Does the hybrid Accord use WE60616 too?
Not documented. The 2018 listing is qualified as gas only. A hybrid rear should be matched off the old part or the VIN rather than assumed to share the gas number.
Is the Accord front documented for 2018 to 2020?
No. The front has no catalog listing at all for this generation, the main gap in any 2018 Honda Accord wheel bearing lookup. Match the old part or the VIN.