Home › Vehicles › Buick › Buick Encore

The short version

  • The front Encore wheel bearing is the 510119 press-in, shared with the Trax and Sonic.
  • The rear follows GM’s own numbering in the 13593158 family for front wheel drive.
  • All wheel drive rears carry their own listing; confirm the drivetrain.
  • Coverage runs 2013 to 2022, and this little Buick started the family two years before the Trax arrived.

The Encore wears the premium badge in GM’s small-crossover trio, but underneath it is the family car: same platform, same press-in front bearing, same thin-aftermarket rear.

The shared front

510119, three badges deep

The front Encore wheel bearing presses into the knuckle, the same 510119 serving the Trax and Sonic.

Search any of the three names; the bearing does not care about the grille.

Encore wheel bearing part numbers

Retail and OEM sourced for 2013 to 2022. Confirm drivetrain for the rear.
Years Detail Number
2013 to 2022 Front, press-in 510119 check price
2013 to 2022 Rear hub, front wheel drive, GM family 13593158 check price
2013 to 2022 Rear, all wheel drive own listing, match by VIN

Every model year this chart resolves: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 and 2022.

Buick Encore pages by year range

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Lookups run through the cross reference page.

Two years before the Trax

2013 and 2014 belong to this badge alone

The Encore reached the US in 2013, ahead of its Chevrolet twin, so early-year searches only resolve under the Buick name.

From 2015 the Trax listings double the options, on the Trax page.

Premium badge, commuter duty

These live the same pothole-and-parking-garage life as the Trax, and impact damage is the common bearing killer. The quiet cabin actually helps diagnosis: a hum you can hear in an Encore is further along than the same hum in a Sonic.

Impact damage is on the pothole page, and the make overview on the Buick page.

Diagnosing an Encore wheel bearing

  1. Weave at speed and place the hum by corner.
  2. Rule out tire drone, especially on winter rubber.
  3. Rock each wheel at twelve and six.
  4. Confirm drivetrain before any rear order.
  5. Budget the press for a front.

The routine is on the checking page, press logistics on the press-in bearing page.

Common questions

Which Encore wheel bearing do I need?

Front, the 510119 press-in. Rear, the GM 13593158 family on front wheel drive; AWD by VIN.

Do Trax parts fit?

Yes, from 2015 when it arrived. The 2013 and 2014 years search under Buick alone.

Do I need a press?

For the front, yes. The rear hub bolts on.

Why no universal rear number?

The aftermarket leaned on GM’s own numbering for this family. Search the vehicle, not a code.

What about the Encore GX?

The 2020 onward GX is a different, larger vehicle. Match it by VIN, not this page.

Is the premium badge worth anything at the parts counter?

No, and that is the good news. You pay Chevrolet prices for the hardware.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.