Home › Vehicles › Buick › Buick Encore › 2013-2022 Buick Encore Wheel Bearing Part Numbers

The short version

  • The 2018 Buick Encore wheel bearing front number is 510119, pressed in, for the whole 2013 to 2022 run.
  • The front wheel drive rear splits between three overlapping listings. Match the number the old part carries: 512438, 512572, or the GM family number 13593158.
  • Moog’s own rear listing stops after 2017. From 2018 through 2022, lean on the GM family number or the old part.
  • All wheel drive rears are not documented by number at all; match the old part or run the VIN.

The 2018 Buick Encore wheel bearing opens a run from 2013 to 2022 with three rear listings. This page covers all ten model years of this small crossover. The front never changes, but the rear takes some sorting out.

Encore wheel bearing numbers at a glance

510119 front, three rear listings

The 2018 Buick Encore wheel bearing front number is 510119, pressed in, for every year from 2013 to 2022.

The front wheel drive rear has three overlapping numbers: 512438, 512572, and the GM family listing 13593158. Match whichever number the old part carries.

Buick Encore wheel bearing part numbers

2013 to 2022 Buick Encore wheel bearing part numbers
Years Detail Number
2018 to 2022 Rear, front wheel drive, aftermarket not documented past 2017 by Moog: match the old part or the VIN
2016 to 2017 Rear, front wheel drive 512572 check price
2013 to 2015 Rear 512438 check price
2013 to 2022 Front, press in 510119 check price
2013 to 2022 Rear, front wheel drive, GM family listing 13593158 check price
2013 to 2022 Rear, all wheel drive not documented in the catalogs we hold: match the old part or the VIN

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Lookups run through the cross reference page.

This page covers the 2013 to 2022 Buick Encore: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022. Other years live on the main Buick Encore wheel bearing page.

Three separate rear listings cover overlapping spans of this same crossover: 512438, 512572, and the GM family number 13593158. They are not options to pick between. They are parallel listings, so match the number the old part carries.

All wheel drive rears carry no documented number at all, which makes them VIN territory. The front presses in, so press in service applies rather than a bolt on hub swap.

Year by year

The 2018 Buick Encore wheel bearing front number, 510119, stays the same across all ten years, 2013 to 2022. The front wheel drive rear splits: 512438 covers 2013 through 2015, 512572 covers 2016 and 2017.

From 2018 through 2022, Moog’s own rear listing stops. The GM family number, 13593158, is the only rear listing that reaches this far. All wheel drive rears stay undocumented across the entire run.

Where this Encore sits in the lineup

This is the only body of the Buick Encore covered on this site. The crossover ran on one design from 2013 through 2022.

A ten year run with three overlapping rear listings is not unusual for a crossover built this long.

Diagnosing a Buick Encore wheel bearing

  1. Listen for the sound. A worn wheel bearing produces a rumble that builds with speed and shifts pitch in turns. Compare it against this guide to turning noise.
  2. Rule out tires first. Uneven wear can sound similar to a bad bearing. This comparison covers the difference.
  3. Check for play at the wheel. With the wheel off the ground, rock it at 12 and 6 o’clock. Looseness there points at the hub or the pressed in bearing.
  4. Watch the ABS light. A failing bearing can trip the ABS light before it ever gets loud.
  5. Confirm the drivetrain before ordering the rear. Front wheel drive and all wheel drive split on this crossover. See how drivetrain affects the wheel bearing you need.

Common questions

What wheel bearing does a 2018 Buick Encore use?

A 2018 Buick Encore uses 510119 at the front, pressed in. The rear is not documented by Moog for 2018. The GM family number 13593158 or the old part decides it instead.

What wheel bearing does a 2014 Buick Encore use?

A 2014 Buick Encore uses 510119 at the front and 512438 at the rear on front wheel drive trims.

Why are there three rear listings for the same crossover?

The catalogs document overlapping spans from different sources: two Moog era listings and a separate GM family number. Match the number the old part carries rather than picking at random.

Is the all wheel drive rear ever documented by number?

No, not across 2013 to 2022. All wheel drive rears are VIN territory for this entire run.

Does the front bearing bolt on or press in?

It presses in. The 2018 Buick Encore wheel bearing front position uses 510119 across every year, and that number is a press in ball bearing, not a bolt on hub.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.