Home › Vehicles › Kia › Kia Sedona
The short version
- The Sedona wheel bearing chart flips completely in 2006, when the second generation arrived.
- 2002 to 2005: front 513058, a bearing shared with the Sorento of those years.
- 2006 to 2009: front 515090 hub and rear 541007, both shared with the Hyundai Entourage.
- The Entourage is this van with a Hyundai badge, so search both names.
Kia’s minivan has a parts history in two clean halves, and the dividing line is the 2006 redesign. Know which side your van sits on and the ordering is easy.
The 2006 flip
An early Sedona wheel bearing up front is the 513058 unit with its seal, fitted 2002 to 2005 and shared with the Sorento.
The second generation went to complete bolt-on assemblies: 515090 front, 541007 rear, for 2006 to 2009.
Sedona wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2006 to 2009 | Front hub, bolt-on | 515090 check price |
| 2006 to 2009 | Rear hub, bolt-on | 541007 check price |
| 2002 to 2005 | Front, with seal 1932 | 513058 check price |
Every model year this chart resolves: 2002, 2003, 2004, 2005, 2006, 2007, 2008 and 2009.
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
The Hyundai twin
Hyundai sold this van as the Entourage for 2007 to 2009, and the 515090 and 541007 numbers serve both badges.
The Hyundai name sometimes prices lower for the identical box. Search both.
The 513058 number from the early vans also leads a busy life across the family, appearing on the Sorento and elsewhere. That relative is on the Sorento page, and the make overview is on the Kia page.
A heavy van is hard on hubs
Loaded family vans run their bearings warm and constantly, and the second generation Sedona is a heavy vehicle by minivan standards. Hum that builds with speed and swells in gentle curves is the classic presentation, usually front first.
Sorting it from tire noise is on the tire noise page.
Diagnosing a Sedona wheel bearing
- Establish the generation: 2005 or earlier against 2006 onward.
- Weave gently at speed and note which corner answers.
- Rock each wheel at twelve and six.
- Check Entourage listings on a second generation van before paying.
- Inspect both fronts together, since heavy vans often wear them as a pair.
The routine is on the checking page.
Common questions
Which Sedona wheel bearing do I need?
2002 to 2005: 513058 front. 2006 to 2009: 515090 front, 541007 rear.
Are Entourage parts identical?
Yes. Same van, different badge, same numbers for 2006 onward hardware.
Is the early front a press job?
It is a bearing-and-seal arrangement rather than a bolt-on hub, so expect more labor than the later vans.
Do the second generation hubs need a press?
No. Front and rear both bolt on.
What about 2010 and newer vans?
Third generation, different parts, outside this page’s verified coverage. Match by VIN.
Should I do both sides?
Replace what is worn, but on a loaded van inspect the opposite side while the wheel is off.