Home › Vehicles › Kia › Kia Sedona › 2015-2019 Kia Sedona Wheel Bearing Part Numbers
The short version
- The 2016 Kia Sedona wheel bearing is 513395 at the front and 512556 at the rear, and both numbers hold for the entire 2015 to 2019 run.
- No year inside this span changes either number.
- The older van’s numbers, 515090 and 541007, belong to the 2006 to 2014 body and do not fit here.
- Front and rear each carry a single listing, so there is no drivetrain or ABS split to check.
The 2016 Kia Sedona wheel bearing sits inside a clean 2015 to 2019 run, about as simple as this site sees. This page covers all five model years of this van body. One front number and one rear number handle every trim and every year.
Sedona wheel bearing numbers at a glance
The 2016 Kia Sedona wheel bearing at the front is 513395 for all five years in this span.
The rear is 512556, also constant from 2015 through 2019.
Kia Sedona wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2015 to 2019 | Front | 513395 check price |
| 2015 to 2019 | Rear | 512556 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2015 to 2019 Kia Sedona: 2015, 2016, 2017, 2018, 2019. Other years live on the main Kia Sedona wheel bearing page.
This body is a clean five year run: one number front, one number rear, no year to year changes. The real trap is reaching backward for the older van’s numbers, 515090 and 541007, which belong to the 2006 to 2014 Sedona and do not fit this one.
Year by year
2015 through 2019 all share the same two numbers behind the 2016 Kia Sedona wheel bearing question: 513395 at the front, 512556 at the rear. Nothing changes model year to model year, so the work here is confirming the position, not chasing a split. That makes this one of the simpler entries on the site once the front and rear positions are confirmed.
Where this Sedona sits in the lineup
This van follows the 2006 to 2014 Sedona, which used its own numbers, and further back the 2002 to 2005 Sedona. Neither older listing carries into this body. Each generation of this van gets its own page here, so cross checking a number against the wrong span is the easiest mistake to make.
Diagnosing a Kia Sedona wheel bearing
- Listen for the sound. A worn wheel bearing produces a rumble that builds with speed and shifts pitch in turns. Compare it against this guide to turning noise.
- Rule out tires first. Cupped or uneven wear can sound similar to a bad bearing. This comparison covers the difference.
- Check for play at the wheel. With the wheel off the ground, rock it at 12 and 6 o’clock. Looseness there points at the hub.
- Watch the ABS light. A failing hub can trip the ABS light before it ever gets loud.
- Understand the sensor relationship. The wheel speed sensor rides in the hub assembly on this van, so how the sensor and hub relate is worth reading before replacing either one alone.
Common questions
What wheel bearing does a 2016 Kia Sedona use?
A 2016 Kia Sedona uses 513395 at the front and 512556 at the rear. Both numbers apply to the whole 2015 to 2019 run.
What wheel bearing does a 2018 Kia Sedona use?
A 2018 Kia Sedona uses the same numbers as every other year in this span. That is 513395 front and 512556 rear.
Do the front and rear numbers change by trim?
No trim split is documented. Every trim on this body shares the same front and rear numbers.
Can I use 2006 to 2014 Sedona numbers on this van?
No. That body used its own numbers, 515090 and 541007, and they do not fit this later Sedona.
Is there an ABS split on this Sedona?
None is documented for the 2016 Kia Sedona wheel bearing at either end. The single front and rear numbers cover ABS and non ABS trims alike.