Home › Vehicles › Suzuki › Suzuki Swift Wheel Bearing Part Numbers

The short version

  • The Suzuki Swift wheel bearing setup barely changed for over a decade. The numbers are ball bearing 510001, inner seal 710394, and outer seal 710175, for 1990 through 2001.
  • The 1990-1994 GT and GTI hot hatch trims are excluded from that standard row. Match the old part or VIN for those.
  • The rear axle has no clean catalog row for the US Swift. Match by VIN or the old part there too.
  • A Canada-only Swift+ sold 2004-2009 is a different vehicle entirely. It is an Aveo-based twin with its own separate rear hub numbers.

Suzuki kept the Swift’s front hardware remarkably stable through two US generations. The ball bearing and seal trio carried from 1990 to 2001, with one exception for hot hatch trims.

Swift wheel bearing numbers at a glance

510001 ball bearing, 710394 inner seal, 710175 outer seal (1990-2001)

This trio covers the Suzuki Swift wheel bearing front end for nearly the entire US run. That span is 1990 through 2001.

The 1990-1994 GT and GTI trims are the exception. Match the old part or VIN instead of this standard row.

Suzuki Swift wheel bearing part numbers

Suzuki Swift (1990-2001) front wheel bearing parts
Years Detail Number
1990-2001 Front ball bearing (excludes 1990-1994 GT and GTI) 510001 check price
1990-2001 Front, inner seal (excludes 1990-1994 GT and GTI) 710394 check price
1990-2001 Front, outer seal (excludes 1990-1994 GT and GTI) 710175 check price

Every model year this chart resolves: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 and 2001.

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Lookups run through the cross reference page.

The GT and GTI do not use this row.

1990-1994 GT and GTI hot hatch trims are excluded from the standard Suzuki Swift wheel bearing numbers above. Match the old part or confirm by VIN instead of ordering 510001 for one of those trims.

Every other 1990-2001 Swift uses the standard trio. That includes the 1995-2001 trims without this exclusion.

A different Swift wears the same name in Canada

A Canada-only model called the Swift+ sold from 2004 through 2009. It is not related to the car covered on this page.

It is an Aveo-based twin with its own rear hub numbers. 541010 covers 2004-2007, and 541009 covers 2008-2009.

No rear number, and a badge twin worth knowing

The rear axle has no clean catalog row for the US Swift in any year. Match the old part or confirm by VIN.

Geo sold a badge-engineered twin of this car as the Metro. That model is not covered on this site yet.

Suzuki’s later compacts, the SX4 and the Kizashi, do not share these numbers. The full lineup sits on the Suzuki hub page.

Diagnosing a Suzuki Swift wheel bearing

  1. Confirm the trim before ordering parts. A 1990-1994 GT or GTI needs a different sourcing approach than the standard trim.
  2. Listen for a hum that builds with speed. A worn bearing typically gets louder the faster the car travels on a steady road.
  3. Jack up the corner and check for play. Rock the tire at 12 and 6 o’clock following this check procedure.
  4. Compare against tire and axle noise. Review tire noise symptoms before assuming the bearing is at fault.
  5. Confirm the standard set fits before buying. Cross check the VIN and trim against axle versus wheel bearing basics if anything seems off.

Common questions

What is the front Suzuki Swift wheel bearing part number?

For 1990 through 2001, it is ball bearing 510001 with seals 710394 inner and 710175 outer. The 1990-1994 GT and GTI are excluded from that row. Those three numbers cover the rest of the run.

Do the GT and GTI trims use a different part?

They are excluded from the standard row documented here. Match the old part or confirm by VIN for those trims instead.

What is the rear Suzuki Swift wheel bearing part number?

The catalogs do not carry a clean rear row for the US Swift. Match the old part or confirm by VIN.

Is the Canadian Swift+ the same car as the US Swift?

No. The Swift+ sold in Canada from 2004 through 2009. It is an Aveo-based twin with its own separate rear hub numbers, unrelated to the Swift covered here.

Is the Geo Metro the same as the Suzuki Swift?

Yes, it was a badge-engineered twin of the same car. The Metro is not covered on this site yet.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.