Home › Vehicles › Suzuki › Suzuki XL-7

The short version

  • Two unrelated trucks wore this badge, and the XL-7 wheel bearing chart splits accordingly.
  • 2001 to 2006: the 513193 front shared with the Vitara and Grand Vitara, over a solid rear axle.
  • 2007 to 2009: the 513276 front and 512358 rear, because that XL7 is secretly a GM crossover.
  • Timken lists the second truck’s front as a drivetrain-split pair, a recorded discrepancy.

The first XL-7 was a stretched Grand Vitara built in Japan; the second was built in Canada on the same platform as the Chevy Equinox. Same badge, not one shared bearing.

Two trucks, two charts

513193, then 513276

The 2001 to 2006 XL-7 wheel bearing up front is 513193, the Vitara family’s hub, both drivetrains.

The 2007 to 2009 truck takes 513276, the same front number as GM’s Theta crossovers.

XL-7 wheel bearing part numbers

Catalog verified in three books. The Timken split on the late front is recorded below.
Years Detail Number
2001 to 2006 Front hub, both drivetrains 513193 check price
2001 to 2006 Rear, solid axle bearing match old part
2007 to 2009 Front hub 513276 check price
2007 to 2009 Rear hub 512358 check price

Every model year this chart resolves: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 and 2009.

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Lookups run through the cross reference page.

The recorded discrepancy

Timken splits what Moog and National do not

For the 2007 to 2009 front, Moog and National list 513276 across the board, while Timken lists HA590332 and HA590333 by drivetrain.

We record both readings rather than average them; the old part and your VIN referee.

The secret Chevrolet

The second XL7 shares its platform with the Equinox and Torrent, which is why its front number appears on the Equinox page too. Cross-shopping GM listings often beats searching the Suzuki badge.

The first truck’s family lives on the Grand Vitara page, and the make overview on the Suzuki page.

The solid axle era

The early XL-7’s rear axle carries pressed bearings the old truck way, a press-and-experience job covered on the axle bearing page. Match the old part when servicing it.

Diagnosing an XL-7 wheel bearing

  1. Name the generation first; nothing crosses between them.
  2. Weave at speed and place the hum.
  3. Rock each wheel at twelve and six.
  4. On a late truck, search GM listings too.
  5. Match the old part on an early rear.

The routine is on the checking page.

Common questions

Which XL-7 wheel bearing fits my 2004?

513193 up front, either drivetrain. The rear axle bearing goes by the old part.

And a 2008?

513276 front, 512358 rear, with Timken’s split noted above.

Do Grand Vitara parts fit?

The early front, yes. The late truck is GM underneath instead.

Do Equinox parts fit the late XL7?

The front listing matches. Confirm years and your VIN.

Do I need a press?

Only for the early rear axle. The hub listings bolt on.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.