Home › Vehicles › Honda › CR-V › 2007-2011 Honda CR-V Wheel Bearing Part Numbers
The short version
- A 2007 Honda CRV wheel bearing order runs front 510092 and rear 512344 FWD or 512345 AWD. The front is only documented through 2009.
- The rear stays split by drivetrain across the whole 2007-2011 generation.
- 2010 and 2011 fronts have no catalog row; match the old part or the VIN.
- 2010 and 2011 rears are still documented, just the front documentation stops.
The rear on this CR-V never changes its logic, drivetrain decides the number every year. A 2007 Honda CRV wheel bearing order at the front is simple too, until the catalogs stop covering it after 2009.
2007 Honda CRV wheel bearing numbers
The front press-in ball is documented for 2007 through 2009 only. 2010 and 2011 fronts go by matching the old part or the VIN.
The rear splits by drivetrain across all five years, 512344 on FWD cars and 512345 on AWD cars.
Honda CR-V wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2007-2011 | Rear hub, AWD | 512345 check price |
| 2007-2011 | Rear hub, FWD | 512344 check price |
| 2007-2009 | Front, press-in ball | 510092 check price |
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
This page covers the 2007-2011 Honda CR-V: 2007, 2008, 2009, 2010, 2011. Other years live on the main Honda CR-V wheel bearing page.
510092 covers the front only through 2009, even though this generation runs to 2011. The rear stays documented for all five years by drivetrain.
A 2010 or 2011 front order goes by matching the old part or the VIN, with 510092 as the closest reference.
Year by year
2007 through 2009 are fully documented at both ends. Front is 510092, rear is 512344 on FWD or 512345 on AWD.
2010 keeps the same rear rows, but the front loses its catalog number. A 2007 Honda CRV wheel bearing front reference still applies as the match point.
2011 follows the same pattern as 2010, rear documented by drivetrain and front by match.
How this generation compares across the CR-V line
This third CR-V generation moved past the trim-based split of the 2002-2006 cars, covered on the 2002-2006 CR-V page. It settled the rear on a straightforward drivetrain question instead. That same drivetrain logic carried into the next generation, discussed on the 2012-2016 CR-V page.
A hum from the rear on an AWD car is worth checking against the axle first. That distinction is covered on the axle bearing page.
Diagnosing a 2007-2011 Honda CR-V wheel bearing
- Confirm the drivetrain, FWD or AWD, before ordering the rear hub.
- Jack up the corner and rock the wheel at twelve and six o’clock, checking for play.
- Spin the wheel by hand and listen for grinding rather than a smooth roll, covered on the checking page.
- Pull the old front bearing on a 2010 or 2011 car and read the stamped number before ordering.
- Drive at highway speed and note whether the noise builds, a sign covered on the noise page.
Common questions
What wheel bearing does a 2007 Honda CRV use?
Front is 510092. Rear is 512344 on FWD or 512345 on AWD.
What wheel bearing does a 2011 Honda CR-V use?
The rear is still 512344 FWD or 512345 AWD. The front has no catalog number for 2011, so match the old part or the VIN, using 510092 as the reference.
Why does the front documentation stop at 2009?
The catalogs simply do not carry a row past 2009 for this generation’s front bearing, even though the body and platform continued unchanged.
Does the AWD rear differ from the FWD rear?
Yes. 512345 is the AWD number and 512344 is the FWD number, and they are not interchangeable.
Can I use the 2007 front number on a 2011 car?
A 2007 Honda CRV wheel bearing number like 510092 is the reference point, but it should be matched against the old part or confirmed by VIN rather than ordered blind for 2010 or 2011.