Home › Vehicles › Jeep › Grand Cherokee

The short version

  • A Grand Cherokee wheel bearing at the front is one number per era. It does not split by two wheel drive or four wheel drive.
  • The rear rode a solid axle through 2010, with different bearing kits for different axle options. From 2011 the rear runs past the catalogs.
  • Everything at the front is a bolt on hub, so corrosion is the difficulty rather than a press.
  • A wobble at speed is a system fault rather than proof of a bad bearing, so check the steering too.

A Grand Cherokee wheel bearing spans model years 1995 to 2019. The front changes by era, not by drivetrain.

The rear tells a different story. It rode a solid axle through 2010, and the catalogs stop there.

Grand Cherokee wheel bearing part numbers

Grand Cherokee wheel bearing part numbers, 1995 to 2019, front hub and rear axle bearing.
Years Detail Number
2011 to 2019 Rear axle bearing, past the catalogs match old part or VIN
2011 to 2019 Front WE60581 check price
2011 to 2018 Front, parallel listing 513324 check price
2005 to 2010 Rear 512302 check price
2005 to 2010 Rear, parallel listing HA590141 check price
2005 to 2010 Front HA590036 check price
1999 to 2004 Front HA598679 check price
1998 to 2004 Rear axle bearing, solid Dana axle, seal 2146 check price
1998 to 2004 Rear axle bearing, solid Dana axle, bearing assembly NP182140-904A1 check price
1995 to 1998 Front 513084 check price
1995 to 1997 Rear axle bearing, solid Dana 35 axle, seal 8660S check price
1995 to 1997 Rear axle bearing, solid Dana 35 axle, bearing 5707 check price
1994 to 1997 Rear axle bearing, solid Dana 44 axle, inner seal 8660S check price
1994 to 1997 Rear axle bearing, solid Dana 44 axle, inner set SET10 check price
1994 to 1997 Rear axle bearing, solid Dana 44 axle, outer seal 4857 check price

Every model year this chart resolves: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 and 2019.

Two numbers once listed here do not belong to this truck

512513 and 512514 trace to the compact Jeep Cherokee and the Chrysler 200, not the Grand Cherokee. The real front number for 2011 to 2019 is a single listing, WE60581, with the parallel 513324 through 2018.

The rear also stops resolving after 2010. A 2011 or later rear goes by the old part or the axle’s own tag rather than a catalog number.

Cross referencing is on the cross reference page.

One front number regardless of drivetrain

No split by two wheel drive or four wheel drive

Both two wheel drive and four wheel drive Grand Cherokees used the same front hub number in every generation checked here. That holds from 1995 through 2019.

Confirm the model year instead when shopping for a Grand Cherokee wheel bearing. That is what actually changes the number on this truck.

Front versus rear design is on the front versus rear page.

The rear axle changed with the frame

Two solid axles, two sets of numbers

The early Grand Cherokee offered a Dana 44 rear axle with a flanged shaft on some trims and a Dana 35 on others. Each carries its own seal and bearing numbers.

The later body brought a different axle again, with its own seal and bearing assembly. None of these is a hub.

The difference between a hub and an axle bearing is on the axle bearing page.

Wobble is not proof of a bearing

Check the whole front end first

A violent shake after a bump needs looseness somewhere in the steering and suspension to start. A worn bearing can contribute, but so can the track bar, its bolts, the ball joints, and the tie rod ends.

Rock the wheel at twelve and six for the bearing. Rock it again at three and nine for the steering.

Impact damage from a bad pothole is on the pothole page.

Diagnosing a Grand Cherokee wheel bearing

  1. Confirm the model year, since that decides the front number here, not the drivetrain.
  2. Identify the rear axle on anything built before 2011.
  3. Test at twelve and six, then three and nine, to separate bearing play from steering play.
  4. Weave at road speed to see whether the noise follows load to one side.
  5. Rule out the tires, since worn tread roars convincingly.

Those steps are on the checking page and the tire noise page.

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Common questions

Which Grand Cherokee wheel bearing do I need?

The front is one number per era, and drivetrain does not change it. The rear depends on the axle before 2011, then runs past the catalogs.

Do 512513 and 512514 fit this truck?

No. Those numbers trace to the compact Jeep Cherokee and the Chrysler 200. The real Grand Cherokee front number is WE60581, or the parallel 513324.

Do I need a press?

No. The front is a bolt on hub unit, so corrosion is the real difficulty.

Will replacing the bearing fix a wobble?

Only if the bearing was the loose part. Check the track bar, its bolts, the ball joints, and the tie rod ends too.

Is the rear a hub or an axle bearing?

Through 2010 it is an axle bearing kit inside the housing, not a hub. After that it runs past the catalogs.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.