Home › Vehicles › Jeep › Jeep Wrangler
The short version
- A Wrangler wheel bearing question starts with the front hub, since this vehicle runs solid axles at both ends across 1995 to 2018.
- The front is a unit hub bearing bolted to the end of the axle. The number changes by year, 513084 through 1999, HA597449 from 2000, WE61905 from 2011.
- The rear is an axle bearing seated in the housing, and it depends on which axle is fitted, a Dana 35 or the heavier Dana 44.
- 1999 alone splits by brake rotor type, composite or full cast, a split the catalogs footnote rather than tie to a running change.
Jeep sold the Wrangler with solid axles front and rear across the entire 1995 to 2018 span. Almost nothing else still sold does that.
That layout changes what the hub is and how it fails, on both ends.
Coverage below runs the full 1995 to 2018 span, split first by front versus rear, then by axle and by year.
What a solid front axle changes
A solid axle keeps both wheels on one beam. The hub mounts to the end of that beam rather than to an independent upright.
The unit itself is still a bolt on hub bearing. That keeps the job manageable despite the axle underneath.
The whole axle moves together over a bump. A hard hit on one side transmits across in a way an independent setup does not.
The Dana 35 and Dana 44 rear axles are different parts
Two different rear axles were fitted across this span, the standard Dana 35 and the heavier Dana 44 with a flanged axle shaft.
Both could be fitted within the same model year, depending on trim. The tag on the axle housing settles it, not the year alone.
Either way, the rear bearing sits inside the axle housing rather than bolting on as a hub. That difference is covered generally on the axle bearing page.
The Dana 35 seal itself is disputed between catalogs. One keeps a single number unchanged from 1990 to 2006. The other switches numbers partway through, in 1994.
Both seal numbers are kept in the table below rather than picked between. The bearing itself does not change either way.
Wrangler wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2018 | Front, JK carryover | WE61905 check price |
| 2011 to 2017 | Front | WE61905 check price |
| 2007 to 2018 | Rear axle bearing, seal, parallel listing | NS9912 check price |
| 2007 to 2017 | Rear axle bearing, parallel listing | WE61053 check price |
| 2007 to 2010 | Front, bolt on unit | 513272 check price |
| 2007 to 2010 | Front, parallel listing | WE60834 check price |
| 2007 to 2009 | Rear axle bearing, Dana 44 axle, parallel listing, seal | 9912 check price |
| 2007 to 2009 | Rear axle bearing, Dana 44 axle, parallel listing, bearing | A-10 check price |
| 2007 to 2008 | Front, unit hub bearing | HA590242 check price |
| 2000 to 2006 | Front, unit hub bearing | HA597449 check price |
| 2000 to 2006 | Front, parallel listing | 513158 check price |
| 2000 to 2006 | Front, full cast rotor, parallel listing | WE60823 check price |
| 1999 | Front, full cast rotor, parallel listing | WE60823 check price |
| 1999 | Front, composite rotor, parallel listing | WE61169 check price |
| 1997 to 1998 | Front, composite rotor, parallel listing | WE61169 check price |
| 1995 to 1999 | Front, unit hub bearing | 513084 check price |
| 1995 to 1999 | Front, unit hub bearing, seal | 710068 check price |
| 1995 to 1996 | Front, composite rotor, parallel listing | WE61169 check price |
| 1994 to 2008 | Rear axle bearing, Dana 44 axle, inner seal | 9912S check price |
| 1994 to 2008 | Rear axle bearing, Dana 44 axle, inner set | SET10 check price |
| 1994 to 2006 | Rear axle bearing, Dana 35 axle, parallel listing, seal | 4857 check price |
| 1994 to 2006 | Rear axle bearing, Dana 44 axle, parallel listing, seal | 9912 check price |
| 1994 to 2006 | Rear axle bearing, Dana 44 axle, parallel listing, bearing | A-10 check price |
| 1990 to 2006 | Rear axle bearing, Dana 35 axle, seal | 8660S check price |
| 1990 to 2006 | Rear axle bearing, Dana 35 axle, bearing | 5707 check price |
Lookups run through the cross reference page.
Every model year this chart resolves: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018.
The front alone carries several parallel listings across some years, and the rear splits by two different axles. Guessing from the year alone is the fastest way to order the wrong part on this model.
Read the number stamped on the part being replaced first, front or rear, then match it above. The year narrows the search, it does not finish it.
The 1999 rotor split
1999 alone splits by brake rotor type. A composite rotor front used WE61169, and a full cast rotor front used WE60823, per the catalogs’ own footnotes.
One parallel listing for 1999 does not carry that split at all, citing a single number instead. That gap is real, so match by the rotor in hand rather than that single listing.
Composite versus full cast is easiest to tell by looking at the rotor itself, not by guessing from the trim level.
Water is the main killer
These are bought to be used. A depth the vehicle handles easily is still deeper than the seals were designed for.
Deep water followed by a long cool down draws moisture past the seal as everything contracts.
A hub that has been submerged should be watched even if it sounds fine afterward. General failure patterns are covered on the failure page.
Lifts, tires and death wobble
Lifts, larger tires and wider wheels are close to universal on these. A taller tire is a longer lever at the hub, and more offset moves the load further from the bearing center.
A violent steering oscillation at speed, often called death wobble, is a separate complaint. It usually traces to steering and suspension joints on the solid axle rather than to a wheel bearing.
A worn bearing produces noise and play, not a sudden shake that starts at one speed. Check the play first before ordering anything.
Diagnosing a Wrangler wheel bearing
- Identify the rear axle, Dana 35 or Dana 44, before ordering a rear part.
- Rock the wheel at twelve and six, since play is the clearest sign here.
- Ask about deep water, because it explains sudden failures.
- Note any lift or tire change and when it happened.
- Rule out steering joints if the complaint is a shake rather than a noise.
Those checks are on the checking page. Tire noise mimics bearing noise closely enough to rule out first, on the tire noise page.
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Common questions
Which Wrangler wheel bearing do I need?
Start with front or rear, then the year. A 1999 front also needs the rotor type, and a rear needs the axle, Dana 35 or Dana 44.
Does a solid axle make the front harder to fit?
No. The hub is still a bolt on unit at the end of the axle.
Which rear axle do I have, Dana 35 or Dana 44?
Check the tag on the axle housing rather than the model year. Trim decided this option, not a running change.
Is my shake at speed a wheel bearing?
Probably not. A violent oscillation at one speed usually traces to steering and suspension joints instead.
Do bigger tires shorten hub life?
They add leverage at the hub, so expect a shorter life after a lift.