Home › Vehicles › Honda › CR-V › 2017-2019 Honda CR-V Wheel Bearing Part Numbers

The short version

  • The 2017 Honda CRV wheel bearing lineup for 2017 to 2019 comes down to one documented number. WE61890 is the rear hub assembly on all wheel drive.
  • Front wheel drive gets no rear listing at all for this generation. It has to be matched off the old part or the VIN.
  • The front position on both drive types is undocumented too. The catalogs only cover one corner of this car.
  • The 2012 to 2016 CR-V had a front wheel drive rear listing, WE61862, that does not carry forward into 2017.

Between 2017 and 2019, the CR-V’s wheel bearing record narrows to a single corner of the car. WE61890 covers the rear hub assembly on all wheel drive models. Front wheel drive rear and the front on either drive type are left for the old part or the VIN.

What the 2017 Honda CRV wheel bearing job needs

WE61890 rear hub, all wheel drive, 2017 to 2020. Front wheel drive rear and front are not documented.

One number covers the rear hub on all wheel drive CR-Vs across the span, with no year split inside it. Front wheel drive rear and the front on either drive type fall outside what the catalogs list.

2017 to 2019 Honda CR-V wheel bearing part numbers

Honda CR-V wheel bearing numbers, 2017 to 2019
Years Detail Number
2017 to 2020 Rear hub assembly, all wheel drive WE61890 check price
2017 to 2019 Rear hub assembly, front wheel drive not documented, match old part or VIN
2017 to 2019 Front not documented, match old part or VIN

Lookups run through the cross reference page.

This page covers the 2017 to 2019 Honda CR-V: 2017, 2018, 2019. Other years live on the main CR-V wheel bearing page.

Drive type decides whether there is an answer at all. The catalogs cover the all wheel drive rear and nothing else on this generation. A front wheel drive CR-V gets no rear listing, even though the 2012 to 2016 car had one.

The 2012 to 2016 CR-V ran WE61862 for front wheel drive against WE60605 for all wheel drive. Do not carry that older front wheel drive number forward on the assumption the rear did not change. Match the old part or the VIN instead.

Year by year

2017, 2018 and 2019 all sit inside a single 2017 to 2020 all wheel drive rear listing in this 2017 Honda CRV wheel bearing generation, so no year in the span moves the number. The split that matters is drive type, not model year. Only the all wheel drive side of that split is documented.

Where the front wheel drive rear number went

The 2012 to 2016 CR-V documented both sides of the rear, WE61862 on front wheel drive and WE60605 on all wheel drive, a listing covered on the 2012 to 2016 CR-V page. That front wheel drive number does not carry forward here. Only the all wheel drive rear is documented for 2017 to 2019.

Sorting out which side of a drive type split applies is covered on how drive type changes the bearing job.

Diagnosing a 2017 Honda CRV wheel bearing

  1. Confirm the drive type first. Only the all wheel drive rear hub has a documented number. That decides whether there is a catalog listing to start from.
  2. Listen for the noise pattern. A worn bearing hums or grinds and gets louder with speed. Work out which corner it comes from before ordering anything.
  3. Check for play at the wheel. Jack up the corner and grab the tire at twelve and six. Rock it to feel for looseness at the hub.
  4. Watch for an ABS light alongside the noise. Hub assemblies commonly carry the ABS sensor ring, so a failing bearing can set a code as well as a sound. See how the hub carries the ABS sensor.
  5. Run a full check before ordering the front. With no documented front number on either drive type, confirm the diagnosis by checking the bearing before you order and match the old part.

Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.

Common questions

What wheel bearing does a 2017 Honda CR-V use?

A 2017 all wheel drive CR-V uses WE61890 as the rear hub assembly. Front wheel drive and the front position on either drive type are not documented for that year.

What wheel bearing does a 2019 Honda CR-V use?

A 2019 all wheel drive CR-V uses the same WE61890 rear hub as 2017 and 2018. Front wheel drive and the front remain undocumented for that year as well.

Does a front wheel drive CR-V have a documented rear bearing?

No. The catalogs list only the all wheel drive rear for 2017 to 2019. A front wheel drive CR-V should be matched off the old part or the VIN.

Is the CR-V front documented for 2017 to 2019?

No. The front has no catalog listing on either drive type for this generation, the main gap in this 2017 Honda CRV wheel bearing lookup. Match the old part or the VIN.

Did the 2012 to 2016 CR-V front wheel drive number carry forward?

No. The 2012 to 2016 car used WE61862 for the front wheel drive rear, a number that stops before 2017. It does not appear again in this generation.

About this page

Wheel Bearing Editorial Team The Wheel Bearing Editorial Team researches, builds and edits wheelbearing.net. Every part number on the site is transcribed from manufacturer and distributor catalogs (Moog, Timken, SKF, National, BCA/NTN) rather than generated, and every vehicle page is checked against the catalog rows before it goes live. When two catalogs disagree, the page shows both readings and tells you to match the old part or the VIN. More about how this site is built.