Home › Vehicles › Toyota › Toyota Venza
The short version
- The front Venza wheel bearing is the 510063 press-in, the same bearing half the Toyota showroom uses.
- The rear splits by drivetrain: 512422 for front wheel drive; all wheel drive rears carry their own listing.
- Coverage is retail-verified for 2009 to 2015, since the vehicle arrived as the print catalogs ended.
- It is a Camry wagon underneath, and the parts bin agrees.
Toyota never quite decided whether the Venza was a wagon or a crossover, but the parts catalog decided immediately: it is a Camry, and it borrows the family’s bearings.
The family front
The front Venza wheel bearing presses into the knuckle, and the same 510063 serves the Camry, Avalon, Sienna and Lexus ES of overlapping years.
Few bearings on this site have deeper listings, which keeps the price honest.
Venza wheel bearing part numbers
| Years | Detail | Number |
|---|---|---|
| 2009 to 2015 | Front, press-in, both drivetrains | 510063 check price |
| 2009 to 2015 | Rear hub, front wheel drive | 512422 check price |
| 2009 to 2015 | Rear, all wheel drive | own listing, match by VIN |
Every model year this chart resolves: 2009, 2010, 2011, 2012, 2013, 2014 and 2015.
Price links lead to Amazon searches for that number. As an Amazon Associate this site earns from qualifying purchases.
Lookups run through the cross reference page.
The relatives to cross-shop
Camry listings carry the same front for years either side of the Venza’s run, covered on the Camry page, and the Avalon shares it too on the Avalon page. The make overview is on the Toyota page.
The rear drivetrain question
All wheel drive Venzas take a different rear hub, so check under the car for a rear differential or run the VIN before ordering.
Guessing from the badge is unreliable, since both drivetrains wore identical trim.
The front needs a press
Like its sedan relatives, the Venza’s front bearing presses in, so the knuckle comes off or an on-car kit does the work. The rear hub bolts on.
Press logistics are on the press-in bearing page and the press service page.
Diagnosing a Venza wheel bearing
- Weave gently at highway speed and place the drone by corner.
- Rule out tire wear, common on these heavy wagons.
- Rock each wheel at twelve and six.
- Confirm drivetrain before ordering a rear.
- Cross-shop Camry listings for the front.
The routine is on the checking page and the tire noise page.
Common questions
Which Venza wheel bearing fits the front?
510063, both drivetrains, for the 2009 to 2015 run. It is a press-in bearing.
Which rear do I need?
512422 with front wheel drive. All wheel drive uses its own listing; confirm by VIN.
Do Camry parts fit?
The front bearing, yes, identically. That family sharing is the whole story here.
Do I need a press?
For the front, yes. The rear bolts on.
What about the 2021 revival Venza?
A different hybrid vehicle entirely. Match it by VIN, not by this page.
Is this vehicle hard on bearings?
Nothing unusual. It wears like the heavy Camry it is.